Duck Hunting Forum banner

Limbsaver pad

890 views 2 replies 3 participants last post by  gsphunter 
#1 ·
I am thinking of installing a Limbsaver pad on my Beretta Pintail shotgun. I have seen some comments regarding the fact that the pads are "sticky" and grab your clothing. Anyone have any comments and/or remedies regarding this.
 
#2 ·
Limbsaver pads are not sticky per say. But if you are replacing a pad on your pintail it may be thicker than your factory pad thus making your length of pull longer. During hunting if you are wearing a heavy jacket it may catch on your jacket pulling in jacket material as you are swinging on a bird causing you to not get the gun into your shoulder correctly. When I add a recoil pad I ensure that the pad thickness is the same as the original pad or I cut the stock to accomodate the thicker pad. My shotguns are set up for a specific length of pull and if I shorten or increase the stock length I do not shoot where I am looking. But limbsaver pads are good product and should not be sticky as in glue.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top