So I got a lee 7/8 drive key slug mold and I made up a few hundred and got them on the scale and came in at about 350gr not the 382 they should be so can I start with 7/8 load data and maybe work it up or is that not a good idea also is there any one out there that has loaded these and sped them up at all or can I just keep the 7/8 charge and pick up speed by having a lighter slug thoughts ideas any thing would help
So I got a lee 7/8 drive key slug mold and I made up a few hundred and got them on the scale and came in at about 350gr not the 382 they should be so can I start with 7/8 load data and maybe work it up or is that not a good idea also is there any one out there that has loaded these and sped them up at all or can I just keep the 7/8 charge and pick up speed by having a lighter slug thoughts ideas any thing would help
I dont now if you have vihtavouri powder in your area , but slug loader in Sweden use N-320 and have really god result
With that slug , you can improve it fill the holes with gluegun and cut the end flat with a sharp carpet knife.
This protect the bottom of wad , B& P Z2M and its' a good wad for european hulls using key slug
So I got a lee 7/8 drive key slug mold and I made up a few hundred and got them on the scale and came in at about 350gr not the 382 they should be so can I start with 7/8 load data and maybe work it up or is that not a good idea also is there any one out there that has loaded these and sped them up at all or can I just keep the 7/8 charge and pick up speed by having a lighter slug thoughts ideas any thing would help
I dont now if you have vihtavouri powder in your area , but slug loader in Sweden use N-320 and have really God result
With that slug , you can improve it fill the holes with gluegun and cut the end flat with a sharp carpet knife.
This protect the bottom of wad , B& P Z2M and its' a good wad for european hulls using key slug
So I got a lee 7/8 drive key slug mold and I made up a few hundred and got them on the scale and came in at about 350gr not the 382 they should be so can I start with 7/8 load data and maybe work it up or is that not a good idea also is there any one out there that has loaded these and sped them up at all or can I just keep the 7/8 charge and pick up speed by having a lighter slug thoughts ideas any thing would help
I dont now if you have vihtavouri powder in your area , but slug loader in Sweden use N-320 and have really God result
With that slug , you can improve it fill the holes with gluegun and cut the end flat with a sharp carpet knife.
This protect the bottom of wad , B& P Z2M and its' a good wad for european hulls using key slug
My favorite is the Lyman 525 diabol + hot glue filling , Z2M 18 maby z2m21 and if you find VV N-340 powder
2,05 -2,15 GRAM is a real screamer, Rollcrimp with a geap T3 approx 450-460m/sec ( sorry for using metric )
Hull is Fiocchi 2 3/4 616 primer closed 58,5 - 59mm final height
/ Peter
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Related Threads
?
?
?
?
?
Duck Hunting Forum
3.2M posts
63.3K members
Since 2000
A forum community dedicated to duck hunters and hunting enthusiasts. Come join the discussion about safety, gear, tips, tricks, optics, hunting, gunsmithing, reviews, reports, accessories, classifieds, and more!