Mossy Oak Vinyl gun wrap

A shotgun forum for basic gun smithing, repair, modifications, and all other detailed shotgun information.

Moderators: waterfowlhunter, don taylor

Mossy Oak Vinyl gun wrap

Postby Norsky » Sat Jul 23, 2011 10:38 am

http://www.mossyoakgraphics.com/shotgun ... t-903.html
I am going to try this. I watched the video and it sure looks to be the best thing in gun camo. It is very affordable also. I will post pictures after I do my BPS. If you follow the "how to install" tab you find the video.
User avatar
Norsky
hunter
 
Posts: 1171
Joined: Wed Jun 04, 2008 6:49 pm
Location: West Central Minnesota


Re: Mossy Oak Vinyl gun wrap

Postby kwackemstackem » Sat Jul 23, 2011 11:45 am

i think im going to do my 870
stackem high
kwackemstackem
hunter
 
Posts: 35
Joined: Mon Jan 10, 2011 10:09 pm

Re: Mossy Oak Vinyl gun wrap

Postby shootermedic816 » Mon Jul 25, 2011 12:46 am

I am interested in doing this also... hopefully its as easy as the videos look to apply it.
-Jonathan
User avatar
shootermedic816
hunter
 
Posts: 69
Joined: Fri May 13, 2011 5:15 am

Re: Mossy Oak Vinyl gun wrap

Postby kindervb » Mon Jul 25, 2011 8:02 am

I did my 870 last year and the barrel was easy to do, the only issue that I had was the back of the receiver and getting it to lay flat without any wrinkles even when making cuts to the material it is really hard. Mine turned out ok and it held up good during the season.
User avatar
kindervb
hunter
 
Posts: 302
Joined: Mon Dec 13, 2010 12:40 pm
Location: Midlothian, VA

Re: Mossy Oak Vinyl gun wrap

Postby beperry1 » Mon Aug 08, 2011 1:32 pm

I ordered one for my Remington 887...could be tough with all of the detail on the forestock and barrel. We'll see once I get it.
beperry1
hunter
 
Posts: 62
Joined: Fri Dec 24, 2010 10:21 pm

Re: Mossy Oak Vinyl gun wrap

Postby shootermedic816 » Mon Aug 08, 2011 7:48 pm

Ordered mine two weeks ago... got it today. UPS dropped it off too late in the day for me to mess with it right now. Should have time to put it on Friday... will let you guys know how it goes.
-Jonathan
User avatar
shootermedic816
hunter
 
Posts: 69
Joined: Fri May 13, 2011 5:15 am

Re: Mossy Oak Vinyl gun wrap

Postby Norsky » Mon Aug 08, 2011 9:55 pm

Beat ya! :thumbsup: I got mine on tonight. Let me tell you fellas this is the best thing in gun camo right now. Only thing I did wrong was over stretch it with the heat gun. It does have a limit but be sure to apply the heat while pulling. Made a patch with a piece of left over scrap. It is almost the next best thing to a dipped gun.
Attachments
IMG_8891 (Medium).JPG
IMG_8890 (Medium).JPG
IMG_8889 (Medium).JPG
IMG_8888 (Medium).JPG
User avatar
Norsky
hunter
 
Posts: 1171
Joined: Wed Jun 04, 2008 6:49 pm
Location: West Central Minnesota

Re: Mossy Oak Vinyl gun wrap

Postby c14smalls » Tue Aug 09, 2011 6:52 am

I have a BPS that I was going to get dipped but after seeing the pics I think I'll wrap it!
User avatar
c14smalls
hunter
 
Posts: 220
Joined: Thu Apr 07, 2011 4:20 pm
Location: Rockwall, TX

Re: Mossy Oak Vinyl gun wrap

Postby beperry1 » Tue Aug 09, 2011 4:59 pm

I got mine on last night...I'll post pics later. It looks freaking badass!
beperry1
hunter
 
Posts: 62
Joined: Fri Dec 24, 2010 10:21 pm

Re: Mossy Oak Vinyl gun wrap

Postby beperry1 » Tue Aug 09, 2011 6:42 pm

My files are too big and wont upload. I'll have to mess with it later.
beperry1
hunter
 
Posts: 62
Joined: Fri Dec 24, 2010 10:21 pm

Re: Mossy Oak Vinyl gun wrap

Postby shootermedic816 » Tue Aug 09, 2011 8:03 pm

Upload them to a photobucket account or something like that and post the link! I can't wait to get mine done on Friday! Did you guys just use a hair dryer for heat or do you need to use a heat gun?
-Jonathan
User avatar
shootermedic816
hunter
 
Posts: 69
Joined: Fri May 13, 2011 5:15 am

Re: Mossy Oak Vinyl gun wrap

Postby Norsky » Tue Aug 09, 2011 8:13 pm

I used a heat gun on low setting. I am sure a hot hair dryer would work. The heat gun would soften it in less than a second and it cools off quickly.
User avatar
Norsky
hunter
 
Posts: 1171
Joined: Wed Jun 04, 2008 6:49 pm
Location: West Central Minnesota

Re: Mossy Oak Vinyl gun wrap

Postby shootermedic816 » Tue Aug 09, 2011 8:30 pm

Sounds good! I will pick up one from Harbor Freight on Friday before I get started!
-Jonathan
User avatar
shootermedic816
hunter
 
Posts: 69
Joined: Fri May 13, 2011 5:15 am

Re: Mossy Oak Vinyl gun wrap

Postby tucker301 » Mon Aug 22, 2011 4:30 pm

The link in the first post does not work.
Here is the full link.

http://www.mossyoakgraphics.com/accessories/shotgun-rifle-mossy-oakr-camo-gun-kit-903.html
tucker301
hunter
 
Posts: 4653
Joined: Fri Jul 09, 2010 1:58 pm

Re: Mossy Oak Vinyl gun wrap

Postby tucker301 » Mon Aug 22, 2011 4:39 pm

After watching the video, I think I'm going to stick with having my stuff dipped.
I don't like the way you have to leave the rib and other parts exposed.

tucker301
hunter
 
Posts: 4653
Joined: Fri Jul 09, 2010 1:58 pm

Re: Mossy Oak Vinyl gun wrap

Postby Mudhole » Tue Aug 23, 2011 7:01 am

Never cared for that, would much prefer the dipping process!

That do it yourself dipping kit would be the way to go, but heard its a lil tricky and takes a lil practice!
________Mudhole________
Waterfowl Population Control
Building a boat blind:
http://www.duckhuntingchat.com/forum/viewtopic.php?f=72&t=67602
Paintin your boat:
http://www.duckhuntingchat.com/forum/viewtopic.php?f=72&t=146292
Mudhole
hunter
 
Posts: 429
Joined: Tue Jul 10, 2007 7:36 am
Location: NW Louisiana

Re: Mossy Oak Vinyl gun wrap

Postby okieduckhunter111 » Sun Feb 12, 2012 6:52 pm

im going to be buying a camo kit and was wondering which is better.. the camoclad or the mossy oak wrap kit??
okieduckhunter111
Newb
 
Posts: 1
Joined: Sun Feb 12, 2012 6:46 pm

Re: Mossy Oak Vinyl gun wrap

Postby huntindog » Tue Feb 14, 2012 3:43 pm

just got a code on FB for $5 off any order at http://www.mossyoakgraphics.com/ - use code FBFAN212 you still pay s&h but its a good deal with a gun wrap or some of the decals.

http://www.mossyoakgraphics.com/
huntindog
Newb
 
Posts: 2
Joined: Tue Jan 31, 2012 1:27 pm


Return to Shotgun Repair & Modifications Forum

Who is online

Users browsing this forum: No registered users and 5 guests