maxus piston and piston sleeve

A shotgun forum for basic gun smithing, repair, modifications, and all other detailed shotgun information.

Moderators: waterfowlhunter, don taylor

maxus piston and piston sleeve

Postby chop123 » Mon Jan 16, 2012 8:19 pm

:help: Ok fellas,i have had my maxus for about two months,but tonight is the first time i have been able to seperate the piston from the piston sleeve,how in the world do you get them back together, help thanks.
chop123
hunter
 
Posts: 39
Joined: Fri Jul 30, 2010 9:16 pm
Location: northumberland county


Re: maxus piston and piston sleeve

Postby clampdaddy » Tue Jan 17, 2012 9:06 pm

It can be tricky. Its hard to explain but I put one side in first and then while holding the piston in one hand and the sleeve in the other I put it across my knee and push to snap the other side in. Sometimes it goes together easy, sometimes it doesn't. I don't separate them anymore. There's no real need to.
User avatar
clampdaddy
hunter
 
Posts: 3686
Joined: Tue May 24, 2011 9:23 pm
Location: Where spoonies go to die

Re: maxus piston and piston sleeve

Postby duckinismyluckin » Sat Feb 25, 2012 10:15 pm

Yes there is you need to clean all parts carefully. I had trouble getting mine apart. But know i have no problem it just takes a man and some strength to do it. I had trouble at first because i babed it. I was affriad to buger something up. But once i put some ass behind it i have no problem.
duckinismyluckin
hunter
 
Posts: 263
Joined: Thu Jan 19, 2012 12:52 am

Re: maxus piston and piston sleeve

Postby clampdaddy » Tue Feb 28, 2012 11:48 pm

duckinismyluckin wrote:Yes there is you need to clean all parts carefully........


So which part of the piston can you reach from the rear that can't be reached from the front? :huh:
User avatar
clampdaddy
hunter
 
Posts: 3686
Joined: Tue May 24, 2011 9:23 pm
Location: Where spoonies go to die

Re: maxus piston and piston sleeve

Postby duckinismyluckin » Wed Feb 29, 2012 5:29 pm

NM im stupid
duckinismyluckin
hunter
 
Posts: 263
Joined: Thu Jan 19, 2012 12:52 am

Re: maxus piston and piston sleeve

Postby waterfowlhunter » Sat Mar 03, 2012 9:28 am

duckinismyluckin wrote:NM im stupid


Not stupid, Just call it a learning experience. :thumbsup:
"A free people ought to be armed" George Washington 1790

‘For those who would give up essential liberty to purchase a little temporary safety, deserve neither Liberty nor safety.’ —Ben Franklin.”
User avatar
waterfowlhunter
Forum & State Moderator
 
Posts: 3813
Joined: Thu Oct 14, 2004 4:53 am
Location: Linden, MI

Re: maxus piston and piston sleeve

Postby duckinismyluckin » Sun Mar 04, 2012 1:54 am

NVM
duckinismyluckin
hunter
 
Posts: 263
Joined: Thu Jan 19, 2012 12:52 am


Return to Shotgun Repair & Modifications Forum

Who is online

Users browsing this forum: No registered users and 5 guests