A shotgun forum for basic gun smithing, repair, modifications, and all other detailed shotgun information.
Moderators: waterfowlhunter, don taylor
IF i get my proper Length of Pull (LOP) and then put on a thick waterfowl jacket, then does it change my LOP. If it does then where do I set the LOP for it to be at the proper setting.
- Posts: 46
- Joined: Sun Jun 08, 2008 10:00 pm
- Location: OH
hollywood wrote:IF i get my proper Length of Pull (LOP) and then put on a thick waterfowl jacket, then does it change my LOP. If it does then where do I set the LOP for it to be at the proper setting.
There are no stupid questions! Set LOP with your normal hunting gear on is the best way, although not always the most practical way. I mean, I wear different things all the time, so if you can narrow it to the most common clothes you wear most of the year then it should be close.
Nothing to see here, move along now!
- Posts: 7193
- Joined: Wed Jan 12, 2011 4:52 pm
- Location: Southern Illinois
that is very true , my waterfowl gun is 1/2 shorter than my other shotguns, waders and jacket take up a lot of room
- Posts: 294
- Joined: Sat Oct 20, 2012 9:49 pm
- Location: Kimberly, Idaho
What I did, was to get a Limbsaver slip on recoil pad. It adds 1" LOP. I can easily slip it off when hunting with full gear and waders. It probably ends up just a bit too short, but is also a little easier to handle in a cramped blind. The slip on pad makes practice at the skeet range much more comfortable.
Hope this helps
- Posts: 3
- Joined: Sat Oct 27, 2012 5:42 am
Return to Shotgun Repair & Modifications Forum
Who is online
Users browsing this forum: No registered users and 5 guests