Owners of Remington SP-10 I need help and photos PLEASE HELP

A shotgun forum for basic gun smithing, repair, modifications, and all other detailed shotgun information.

Moderators: waterfowlhunter, don taylor

Re: Owners of Remington SP-10, I need help and photos PLEASE

Postby Petr Russia » Fri Apr 05, 2013 11:22 am

Another good news! I have received Ballistic Product Roll Crimper for 10Ga. I think now ammo should be much better than using my home-made roll crimper.
Petr Russia
hunter
 
Posts: 53
Joined: Mon Jan 21, 2013 2:04 am


Re: Owners of Remington SP-10, I need help and photos PLEASE

Postby Petr Russia » Wed Dec 04, 2013 1:30 pm

Hello! It is me again. :)
Please provide photo of ejector inside the receiver.
Petr Russia
hunter
 
Posts: 53
Joined: Mon Jan 21, 2013 2:04 am

Re: Owners of Remington SP-10, I need help and photos PLEASE

Postby waterfowlhunter » Sat Dec 21, 2013 8:30 am

Petr,
Did you get what you needed? I can take pics later today if you still need them.
"A free people ought to be armed" George Washington 1790

‘For those who would give up essential liberty to purchase a little temporary safety, deserve neither Liberty nor safety.’ —Ben Franklin.”
User avatar
waterfowlhunter
Forum & State Moderator
 
Posts: 3794
Joined: Thu Oct 14, 2004 4:53 am
Location: Linden, MI

Re: Owners of Remington SP-10, I need help and photos PLEASE

Postby Petr Russia » Fri Dec 27, 2013 12:13 pm

Yes, please provide it. I found picture on midway but I would like to see real photo on working shotgun not picture in internet-shop :)
I think my ejector is very small and needs to be changed.
Petr Russia
hunter
 
Posts: 53
Joined: Mon Jan 21, 2013 2:04 am

Re: Owners of Remington SP-10, I need help and photos PLEASE

Postby waterfowlhunter » Fri Dec 27, 2013 4:55 pm

P1020457.JPG


P1020456.JPG


P1020455.JPG


P1020454.JPG
"A free people ought to be armed" George Washington 1790

‘For those who would give up essential liberty to purchase a little temporary safety, deserve neither Liberty nor safety.’ —Ben Franklin.”
User avatar
waterfowlhunter
Forum & State Moderator
 
Posts: 3794
Joined: Thu Oct 14, 2004 4:53 am
Location: Linden, MI

Re: Owners of Remington SP-10, I need help and photos PLEASE

Postby Petr Russia » Sun Dec 29, 2013 2:44 am

Thank you! I will change it. Mine is much smaller.
Petr Russia
hunter
 
Posts: 53
Joined: Mon Jan 21, 2013 2:04 am

Re: Owners of Remington SP-10, I need help and photos PLEASE

Postby waterfowlhunter » Sun Dec 29, 2013 5:25 am

Welcome.
"A free people ought to be armed" George Washington 1790

‘For those who would give up essential liberty to purchase a little temporary safety, deserve neither Liberty nor safety.’ —Ben Franklin.”
User avatar
waterfowlhunter
Forum & State Moderator
 
Posts: 3794
Joined: Thu Oct 14, 2004 4:53 am
Location: Linden, MI

Re: Owners of Remington SP-10, I need help and photos PLEASE

Postby War Wagon » Tue Dec 31, 2013 7:39 pm

Nice Camera work, :clapping: I wanted to send him some pic's but mine looks bad. :no:
User avatar
War Wagon
hunter
 
Posts: 988
Joined: Tue Mar 22, 2011 7:23 pm
Location: Green Bay Wisconsin

Re: Owners of Remington SP-10, I need help and photos PLEASE

Postby 3200 man » Wed Jan 01, 2014 8:55 am

Dang Waterfowlhunter , you're pretty darn handy with that camera , nice Pic's !

But , can you shoot straight , for a East Coast Guy ?.......... :hi: :lol3: :lol3: :lol3: :lol3:
3200 man
hunter
 
Posts: 2955
Joined: Thu Nov 12, 2009 10:30 am

Re: Owners of Remington SP-10, I need help and photos PLEASE

Postby waterfowlhunter » Wed Jan 01, 2014 5:16 pm

War Wagon wrote:Nice Camera work, :clapping: I wanted to send him some pic's but mine looks bad. :no:


Thanks, that's with a cheap Panasonic pocket camera :thumbsup: .
"A free people ought to be armed" George Washington 1790

‘For those who would give up essential liberty to purchase a little temporary safety, deserve neither Liberty nor safety.’ —Ben Franklin.”
User avatar
waterfowlhunter
Forum & State Moderator
 
Posts: 3794
Joined: Thu Oct 14, 2004 4:53 am
Location: Linden, MI

Re: Owners of Remington SP-10, I need help and photos PLEASE

Postby waterfowlhunter » Wed Jan 01, 2014 5:19 pm

3200 man wrote:Dang Waterfowlhunter , you're pretty darn handy with that camera , nice Pic's !

But , can you shoot straight , for a East Coast Guy ?.......... :hi: :lol3: :lol3: :lol3: :lol3:


thanks. :lol3: The guys I hunt with call me "long shot" If they are under 30 yds I often completely miss on the first shot, :huh: get them out at 40+ yds and they are dead first shot every time. I guess I need to dump the briley goose choke :biggrin:.
"A free people ought to be armed" George Washington 1790

‘For those who would give up essential liberty to purchase a little temporary safety, deserve neither Liberty nor safety.’ —Ben Franklin.”
User avatar
waterfowlhunter
Forum & State Moderator
 
Posts: 3794
Joined: Thu Oct 14, 2004 4:53 am
Location: Linden, MI

Re: Owners of Remington SP-10, I need help and photos PLEASE

Postby waterfowlhunter » Wed Jan 01, 2014 5:22 pm

I just realized, after looking at the pics, I really need to clean that gun. :fingerhead:
"A free people ought to be armed" George Washington 1790

‘For those who would give up essential liberty to purchase a little temporary safety, deserve neither Liberty nor safety.’ —Ben Franklin.”
User avatar
waterfowlhunter
Forum & State Moderator
 
Posts: 3794
Joined: Thu Oct 14, 2004 4:53 am
Location: Linden, MI

Re: Owners of Remington SP-10, I need help and photos PLEASE

Postby Petr Russia » Sat Jan 25, 2014 6:52 am

Today I shoot clays and empty shell get stuck and left in the barrel. I can't open the bolt and remove the barrel. Trying to open the bolt like on AK (strong kick to bolt handle) I broken the bolt handle. I found nothing on brownells, midway and ebay. And rather if there is on numrich gunparts, I can't buy on it, because I am outside the USA. Do anyone have this spare part? I may pay via paypal and I need shipping to Nevada or California.

This is photos
http://s005.radikal.ru/i209/1401/7e/c5487494f325.jpg
http://s020.radikal.ru/i712/1401/16/77b0440b8afb.jpg
Petr Russia
hunter
 
Posts: 53
Joined: Mon Jan 21, 2013 2:04 am

Re: Owners of Remington SP-10, I need help and photos PLEASE

Postby Petr Russia » Sat Jan 25, 2014 12:33 pm

Petr Russia
hunter
 
Posts: 53
Joined: Mon Jan 21, 2013 2:04 am

Re: Owners of Remington SP-10, I need help and photos PLEASE

Postby waterfowlhunter » Sat Jan 25, 2014 4:37 pm

By the look of that primer you had quite a hot load there. looks like it flowed out around the firing pin hit. and is it just the picture or is that gun really in that rough of shape. It looks like there are gouges in the barrel extension. :huh: I do not have any at this time but if you find one I am sure there is a way to get it to you.
"A free people ought to be armed" George Washington 1790

‘For those who would give up essential liberty to purchase a little temporary safety, deserve neither Liberty nor safety.’ —Ben Franklin.”
User avatar
waterfowlhunter
Forum & State Moderator
 
Posts: 3794
Joined: Thu Oct 14, 2004 4:53 am
Location: Linden, MI

Re: Owners of Remington SP-10, I need help and photos PLEASE

Postby War Wagon » Sat Jan 25, 2014 6:36 pm

Good luck finding the bolt handle. Brownell's say that part is not available anymore.
You will have to find it from a Smith someplace.
User avatar
War Wagon
hunter
 
Posts: 988
Joined: Tue Mar 22, 2011 7:23 pm
Location: Green Bay Wisconsin

Re: Owners of Remington SP-10, I need help and photos PLEASE

Postby cluckmeister » Sat Jan 25, 2014 11:03 pm

I personally would see if I could get another receiver, who knows what stress damage was done to the reciever
If you're there for the limit, you're there for the wrong reason
cluckmeister
State Moderator
 
Posts: 2544
Joined: Fri Sep 14, 2012 3:41 pm
Location: Central Kansas

Re: Owners of Remington SP-10, I need help and photos PLEASE

Postby Petr Russia » Sun Jan 26, 2014 5:02 am

cluckmeister wrote:I personally would see if I could get another receiver, who knows what stress damage was done to the reciever

Yes, I would like to change the receiver and the bolt, but have no way. In Russia it is absolutely impossible to find, in USA I didn't see the bolt assembly for sale. Receiver is 100% impossible to buy and to bring outside the USA for the stranger. Also with new receiver I will have some troubles with russian laws.
Petr Russia
hunter
 
Posts: 53
Joined: Mon Jan 21, 2013 2:04 am

Re: Owners of Remington SP-10, I need help and photos PLEASE

Postby Petr Russia » Sun Jan 26, 2014 5:03 am

War Wagon wrote:Good luck finding the bolt handle. Brownell's say that part is not available anymore.
You will have to find it from a Smith someplace.

What is Smith someplace? Please give me a link.
Petr Russia
hunter
 
Posts: 53
Joined: Mon Jan 21, 2013 2:04 am

Re: Owners of Remington SP-10, I need help and photos PLEASE

Postby Petr Russia » Sun Jan 26, 2014 5:05 am

waterfowlhunter wrote:By the look of that primer you had quite a hot load there. looks like it flowed out around the firing pin hit. and is it just the picture or is that gun really in that rough of shape. It looks like there are gouges in the barrel extension. :huh: I do not have any at this time but if you find one I am sure there is a way to get it to you.

I don't know that happened. If I can't repair it to work good, maybe I should leave it in police to have it destroyed by law.
Petr Russia
hunter
 
Posts: 53
Joined: Mon Jan 21, 2013 2:04 am

Re: Owners of Remington SP-10, I need help and photos PLEASE

Postby Petr Russia » Mon Apr 21, 2014 6:51 am

I am still looking for operation handle, Remington number is F94116...
Petr Russia
hunter
 
Posts: 53
Joined: Mon Jan 21, 2013 2:04 am

Re: Owners of Remington SP-10, I need help and photos PLEASE

Postby Petr Russia » Tue Apr 22, 2014 11:00 am

And as well I would like to sell some chokes. They are quite new and as for me, I shoot nothing through them. All bought them on ebay in 2012 and 2013 years.

$20 each. All together $55.
First two sold will be shipped with wrench.
Located in Moscow. International small parcel is $10. I will use russian stamps, so you may collect them as well.
Payment with paypal, sorry I don't have bank account in USA.

PM if you are interested in.
Attachments
CIMG1965.JPG
SP10 chokes
Petr Russia
hunter
 
Posts: 53
Joined: Mon Jan 21, 2013 2:04 am

Re: Owners of Remington SP-10, I need help and photos PLEASE

Postby Honk-n-quack » Tue Apr 22, 2014 7:20 pm

Check here they have bolts springs barrels and everything

http://www.gunpartscorp.com/Manufacture ... -41225.htm
Honk-n-quack
hunter
 
Posts: 585
Joined: Tue Jan 29, 2013 10:54 am
Location: Eugene Oregon

Re: Owners of Remington SP-10, I need help and photos PLEASE

Postby Petr Russia » Tue Apr 22, 2014 10:59 pm

Honk-n-quack wrote:Check here they have bolts springs barrels and everything

http://www.gunpartscorp.com/Manufacture ... -41225.htm

http://www.gunpartscorp.com/Products/244920A.htm
Sold out.
Petr Russia
hunter
 
Posts: 53
Joined: Mon Jan 21, 2013 2:04 am

Re: Owners of Remington SP-10, I need help and photos PLEASE

Postby Petr Russia » Wed Apr 23, 2014 11:54 pm

Suddenly, I saw and bought it on ebay in last few minutes of auction :))))))
Petr Russia
hunter
 
Posts: 53
Joined: Mon Jan 21, 2013 2:04 am

PreviousNext

Return to Shotgun Repair & Modifications Forum

Who is online

Users browsing this forum: No registered users and 2 guests