who installs chokes in invector threads ?

A shotgun forum for basic gun smithing, repair, modifications, and all other detailed shotgun information.

Moderators: waterfowlhunter, don taylor

who installs chokes in invector threads ?

Postby 10gaugemeow » Wed Feb 06, 2013 5:41 pm

I have a stoeger single barrel 10 game muzzle diameter is .993 I was told while its big enough for invector threads most no one has the tooling.... so any of y'all know who can thread for in vector threads. I don't want truchoke threads really
Charlie sheen for president 2012 !!! ^_^
10gaugemeow
hunter
 
Posts: 421
Joined: Sat Aug 21, 2010 9:06 pm
Location: Seminole GA


Re: who installs chokes in invector threads ?

Postby duckslayer74 » Wed Feb 06, 2013 6:35 pm

Call Briley and see what they can do for you.
Winchester SX2 12ga, SX3 20ga, Kicks Highflyer and Terror chokes.
User avatar
duckslayer74
hunter
 
Posts: 798
Joined: Sun Nov 13, 2011 6:25 pm
Location: Harrisville, UT

Re: who installs chokes in invector threads ?

Postby vacuum6 » Wed Feb 06, 2013 8:28 pm

there is not much difference in the length of a truchoke tube and an invector tube.....unless you mean invector PLUS. the invector PLUS is a longer tube. the longer tubes throw better patterns in my guns. I had truchoke tubes installed in an o/u. very bad patterns. when I put the extended (not flush mount) after market tubes into the truchoke threaded barrel, my patterns improved...but still not as good as the patterns from my factory invector PLUS tubes(different gun --that may be part of it ). my point is that the longer tubes throw better patterns in my guns, and the invector and truchoke tubes are pretty short tubes.
vacuum6
hunter
 
Posts: 402
Joined: Mon Feb 28, 2005 7:52 am
Location: Wisconsin

Re: who installs chokes in invector threads ?

Postby cannon » Wed Feb 06, 2013 9:27 pm

Stan Baker, Seattle, Washington. That's who threaded mine. I'm thinking he's the only guy that does those.


Sent from my iPhone using Tapatalk
Smell that? Smells like sumthin died in here.
User avatar
cannon
hunter
 
Posts: 4036
Joined: Wed Jan 16, 2008 12:17 pm
Location: At the stop sign in the ditch at Byers Farm, unlocking the gate.

Re: who installs chokes in invector threads ?

Postby orphanedcowboy » Thu Feb 07, 2013 10:19 am

Mike Orlen or Steve Rose both do Invector threads
NRA Life Member
User avatar
orphanedcowboy
hunter
 
Posts: 1726
Joined: Sun Feb 27, 2005 10:39 am
Location: Ft. Worth, Texas

Re: who installs chokes in invector threads ?

Postby 10gaugemeow » Thu Feb 07, 2013 8:26 pm

The 10 ga invector is actually a invector+ but browning doesn't call it that for some reason. I think the plus choke is 2.5"
Charlie sheen for president 2012 !!! ^_^
10gaugemeow
hunter
 
Posts: 421
Joined: Sat Aug 21, 2010 9:06 pm
Location: Seminole GA


Return to Shotgun Repair & Modifications Forum

Who is online

Users browsing this forum: No registered users and 9 guests