Looking for a breech bolt assembly for a Remington 1187 SP

A shotgun forum for basic gun smithing, repair, modifications, and all other detailed shotgun information.

Moderators: waterfowlhunter, don taylor

Looking for a breech bolt assembly for a Remington 1187 SP

Postby rainingmallards » Fri Jan 31, 2014 10:01 pm

title says it all except the SP 1187 is the 3" version
the top part of the bolt keeps coming out not allowing the bolt to slide
back properly

also, I need a new shell latch feeder
rainingmallards
hunter
 
Posts: 263
Joined: Fri Mar 29, 2013 7:35 am


Re: Looking for a breech bolt assembly for a Remington 1187

Postby goosepit2007 » Sun Feb 02, 2014 12:02 am

brownells
goosepit2007
hunter
 
Posts: 885
Joined: Thu Jul 19, 2012 8:13 pm

Re: Looking for a breech bolt assembly for a Remington 1187

Postby cluckmeister » Sun Feb 02, 2014 8:35 pm

If Brownells don't have it just call Remington
If you're there for the limit, you're there for the wrong reason
cluckmeister
State Moderator
 
Posts: 2330
Joined: Fri Sep 14, 2012 3:41 pm
Location: Central Kansas

Re: Looking for a breech bolt assembly for a Remington 1187

Postby O2Fsh » Mon Feb 03, 2014 8:08 am

RH is out of stock on Brownells. LH is in stock!
O2Fsh
In a marsh somewhere, nowhere near your spot.
User avatar
O2Fsh
hunter
 
Posts: 539
Joined: Fri Dec 25, 2009 4:25 pm
Location: CT

Re: Looking for a breech bolt assembly for a Remington 1187

Postby z51 » Fri Feb 07, 2014 6:47 am

Go to Remington they usually have good service and prices.
z51
hunter
 
Posts: 1239
Joined: Sat Dec 15, 2012 7:02 am
Location: Central Arkansas

Re: Looking for a breech bolt assembly for a Remington 1187

Postby rainingmallards » Fri Feb 07, 2014 8:35 am

one other question and I realize this is fairly odd.....the holes in the stock that the butt pad
screw into one is kinda worn out....one of the holes the screws goes in fine but the other is
bored out so to speak...has anyone ever encountered something like this before and is it
FIXABLE or is there a repair for this....the holes are molded into the stock itself

this is an old gun but has a great deal of sentimental value to me
rainingmallards
hunter
 
Posts: 263
Joined: Fri Mar 29, 2013 7:35 am

Re: Looking for a breech bolt assembly for a Remington 1187

Postby z51 » Fri Feb 07, 2014 9:00 am

Two part epoxy. Just a dab on a toothpick. Swirl it around in the hole top to bottom. DO NOT CLOSE UP THE HOLE. Give it full drying time or you will glue the screw in the stock. Try the screw without the pad first to make sure it will be tight.
z51
hunter
 
Posts: 1239
Joined: Sat Dec 15, 2012 7:02 am
Location: Central Arkansas

Re: Looking for a breech bolt assembly for a Remington 1187

Postby War Wagon » Sat Feb 08, 2014 5:49 am

I drill the holes out with a 1/2" dill to a depth of 1/2" insert the knearled SS insert into hole with epoxy glue. The insert runs about .515 so there is a tight fit on the wood, you got to tap them into the stock. Then remove the wood screws out of recoil pad and replace them with 10/24 SS screws. You will never have a problem removing screws again. Anybody with a lathe can make these.
Attachments
002.JPG
Recoil pad wit 10/24 SS screws installed
005.JPG
SS insert with screws
001.JPG
Stock with inserts in
004.JPG
another view of SS inserts
User avatar
War Wagon
hunter
 
Posts: 976
Joined: Tue Mar 22, 2011 7:23 pm
Location: Green Bay Wisconsin

Re: Looking for a breech bolt assembly for a Remington 1187

Postby War Wagon » Sat Feb 08, 2014 6:24 am

You can buy these from here. S&W Supply Company

http://www.swsupply.com/downloads/Whiz_Nut_Photo.jpg
Attachments
Whiz_Nut_Photo.jpg
User avatar
War Wagon
hunter
 
Posts: 976
Joined: Tue Mar 22, 2011 7:23 pm
Location: Green Bay Wisconsin


Return to Shotgun Repair & Modifications Forum

Who is online

Users browsing this forum: No registered users and 9 guests