miltec does it work?

A shotgun forum for basic gun smithing, repair, modifications, and all other detailed shotgun information.

Moderators: waterfowlhunter, don taylor

miltec does it work?

Postby dogseat2 » Thu Nov 06, 2008 8:46 am

I have been reading about miltec and am wondering if it is as good as they say it is. Does it really work or is it a hype? let me know if you have tried it and your results.

Scott
dogseat2
hunter
 
Posts: 129
Joined: Tue Nov 06, 2007 4:34 pm


Postby colemanhuntsducks » Thu Nov 06, 2008 8:59 am

havent heard of it was is it??
colemanhuntsducks
hunter
 
Posts: 276
Joined: Mon Oct 15, 2007 12:41 pm
Location: tulalip washington

Postby dogseat2 » Thu Nov 06, 2008 9:07 am

do a search on it, it a synthetic gun oil that is to coat you gun for rust and protection.

www.militec1.com
dogseat2
hunter
 
Posts: 129
Joined: Tue Nov 06, 2007 4:34 pm

Postby dogseat2 » Fri Nov 07, 2008 3:11 pm

All the hunters and gun nuts, and you have no answers. If you want to try it let me know as I am going to be a dealer and plan to make a butt load of $$$$$.

No still want to know if anyone has tried it?
dogseat2
hunter
 
Posts: 129
Joined: Tue Nov 06, 2007 4:34 pm

Postby GroundSwatter » Fri Nov 07, 2008 3:36 pm

Its the first I've heard of it too?
It's a fact that 70 percent of the people who purchase heavier tackle do so with the categorical I just lost a huge snook! Einstein Hairdo.The other 30 percent have either Tarpon Fever or are sporting a hand cramped into a claw from a deepwater grouper.
User avatar
GroundSwatter
hunter
 
Posts: 3641
Joined: Fri Oct 26, 2007 3:22 pm
Location: GTMO from NE Texas

Postby freeflow » Fri Nov 07, 2008 8:42 pm

I started using miltec back in 05 in Iraq; Just coated the bolt and heated it up to 140 and run it dry with CLP in the but stock for back up. and I did the same with my last deployment. but back home I run a 50/50 mix of miltec and CLP.
Last edited by freeflow on Sat Nov 22, 2008 8:59 pm, edited 1 time in total.
freeflow
hunter
 
Posts: 11
Joined: Sat Oct 25, 2008 9:07 am
Location: Crowley Texas

Postby waterfowlhunter » Sun Nov 09, 2008 9:30 am

what is wrong with plain old gun oil? :huh: Been using it for 30 years and never had any issues. My guns get wet, Put in cases wet, neglected and Used hard. Never had any issues so far.

but I do like trying new products but almost always go back to the stuff that works. :thumbsup:

I have used a lot of CLP in my day. had several gallons of it for the 5" - 54. it would go out of date and I would take it home. I love the way it seperates and has to be mixed up after sitting :thumbsdown: Used it to lubricate farm equipment and it worked great in auto oilers.
"A free people ought to be armed" George Washington 1790

‘For those who would give up essential liberty to purchase a little temporary safety, deserve neither Liberty nor safety.’ —Ben Franklin.”
User avatar
waterfowlhunter
Forum & State Moderator
 
Posts: 3703
Joined: Thu Oct 14, 2004 4:53 am
Location: Linden, MI

Postby dogseat2 » Sun Nov 09, 2008 4:56 pm

Cuz I have a 870 express and it rusts just thinking about it pos finish.

I coated it with this stuff per instructions and went out in snow storm here, all I can say is its getting put on all my guns!! This stuff is very good, snow just ran off gun and was put away wet, set for 3 days now and no rust. Still looks like the night I put this stuff on.

Scott
dogseat2
hunter
 
Posts: 129
Joined: Tue Nov 06, 2007 4:34 pm

Postby quackillz » Mon Nov 10, 2008 12:22 pm

Tried a lil bit from work on the SBE and yes it is good. I also heated my bolt up. Seems like at least our service is going with Miltec instead of Breakfree.
My lab is smarter than your honor student
quackillz
hunter
 
Posts: 93
Joined: Tue Dec 11, 2007 5:23 pm
Location: Kodiak

Postby hickunit » Sun Nov 23, 2008 1:25 pm

:thumbsup:
I love this stuff. I used it while deployed in Iraq. Didn't take much at all to keep the bolt moving and made it a hell of a lot easier to clean afterwards. I was able to get my hands on a couple of extra bottles and still currently use them on all of my guns at home. I use it on all the internals during hunting season and a thin thin layer on the entire gun while I store them. Amazing stuff. After looking at the website I am going to be ordering some more. Big discount for military and law enforcement. I most def will be taking advantage of that.
User avatar
hickunit
hunter
 
Posts: 167
Joined: Mon Sep 22, 2008 3:53 am
Location: Fort Fairfield, Maine

Postby bgoldhunter » Sun Nov 23, 2008 10:15 pm

Miltec works well. Hard to find locally, though.
User avatar
bgoldhunter
hunter
 
Posts: 2439
Joined: Wed Jul 21, 2004 9:46 pm
Location: Missouri

Postby Maineduckhunter » Tue Nov 25, 2008 6:12 pm

I have used Miltec for a couple of years. Does it work, yes it does, but it did not do a good enough job for me if freezing conditions.
I switched to another product called Eezox. Beats Miltec in the rust prevention category, and also lubes very well.
User avatar
Maineduckhunter
hunter
 
Posts: 521
Joined: Thu Oct 07, 2004 7:48 pm
Location: Southern Maine

Postby bgoldhunter » Tue Nov 25, 2008 9:13 pm

I have Eezox on order to protect my pretty guns. After the writeup I read, I figured it was worth a shot.
User avatar
bgoldhunter
hunter
 
Posts: 2439
Joined: Wed Jul 21, 2004 9:46 pm
Location: Missouri

Postby Subsonic » Mon Dec 01, 2008 8:09 pm

Miltec is good stuff. I have used it in my pistols for years and am pleased with the results.
Subsonic
hunter
 
Posts: 30
Joined: Sun Nov 30, 2008 8:37 am


Return to Shotgun Repair & Modifications Forum

Who is online

Users browsing this forum: No registered users and 6 guests