Duck Hunting Forum banner

Replacing the side door

2K views 2 replies 2 participants last post by  Cypress_Bend 
#1 ·
I have a 6x12 trailer and the side door is a foam core door. well long story short the wind whipped open the door and messed it up. Now I am going to have to replace the door. I was thinking about taking the current door off and replacing with a solid door made out of plywood with some beefed up hinges. Has anyone done this. Curious before I get into the middle of it what all may be involved.
 
#3 ·
The door has a latch type system on the bottom to help keep it wide open if you are coming in and out all the time. I think the wind caught the door, slung open the door and the latch system hit the side of the trailer, since the door is made of a thin metal, and styrofoam it pouched in the door some.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top