first off i don't use very much oil at all on my gun (i have your exact gun). also have you pulled the pin and cleaned the triger assy?? mine did the SAME EXACT thing and that ended up being the problem for me. pull the barrel, pull the pin and remove the action then push the pin and the trigger assy falls out the bottom. take it on a piece of cloth and spray the crap out of it with gun solvent. keep it of the finish if you can because it eats the paint as i found out the hard way. dont put any lub oil at all and try to dry it out as best you can when your finished. i only have to do this once or twice a season, not every time out!! good luck hope it helps!! if not i'll give you $20 for your single shot :toofunny:
Proudly owned by "HR A hunters dream of Westwind JH"
I quote HNTFSH ****Hunting is a form of training but not the first wave of it. *****