Here is the Versamax bolt in the SBE II. It cycles, the hammer hits the firing pin and it operates and locks back just like it was made for it. of course the bolt head would not lock up in the benelli Barrel but I think I could put the Benelli bolt head in the Versamax carrier. the inside of the bolt carriers are very similar and there is probably room for the inertia spring. I just found this all very interesting. the big difference is the quality of work. the Remington part looks like a rough casting compared to the Benelli that has been properly finished.
Yes the Benelli Bolt Carrier will fit in the Versamax receiver too but is a bit tight.
"A free people ought to be armed" George Washington 1790
‘For those who would give up essential liberty to purchase a little temporary safety, deserve neither Liberty nor safety.’ —Ben Franklin.”