getting started reloading???

Interact with others on shot gun shells, reloading, ballistics, chokes, or anything that has to do with your shooting.

Moderators: donell67, pennsyltucky, Ohio Wildfowler, NV Guide

getting started reloading???

Postby sigep538 » Tue Jul 18, 2006 8:20 am

http://www.cabelas.com/cabelas/en/templ ... id=0003150
I know its cheap but im in college and dont have a lot of spare cash. I would like to be able to hunt with my A5's more often and do more hand clays. Any other recomendations on what else would i need. Any walk throughs on the internet. thanks guys.
Be men for if we are not men we canot be brothers. Fall 96
Teal 5
Canada 1
Ruddy 1
Gadwall 2
Ring-necked 4
Canvasback 1
Mallard 1
Spoonie 2
tree rats 15
doves 1
dragonflies 2
Deer 1
sigep538
hunter
 
Posts: 176
Joined: Mon Jun 19, 2006 12:10 pm
Location: Conway, Ar


Postby ohsobad_hunter » Tue Jul 18, 2006 8:58 am

You should get you a mec 600. They are a cheap single stage reloader and they work great. I got a mec 900 loader I would sell for cheap, but it is a 410 press. Sorry. Go to Ebay.com and type it Mec600 or click this: http://search.ebay.com/search/search.dl ... category0=
I would stay away from that load all if I were you, it is built very cheap, you are better off buying a mec600, better investment.
>>---Mat---->
User avatar
ohsobad_hunter
hunter
 
Posts: 2281
Joined: Mon Jul 05, 2004 2:27 pm
Location: Oklahoma

Postby sigep538 » Tue Jul 18, 2006 9:15 am

Thanks I was also looking at that. I might be asking her magisty for that or a gift card for christmas. :umm: any more sugestions
Be men for if we are not men we canot be brothers. Fall 96
Teal 5
Canada 1
Ruddy 1
Gadwall 2
Ring-necked 4
Canvasback 1
Mallard 1
Spoonie 2
tree rats 15
doves 1
dragonflies 2
Deer 1
sigep538
hunter
 
Posts: 176
Joined: Mon Jun 19, 2006 12:10 pm
Location: Conway, Ar

Postby Citori12 » Wed Jul 19, 2006 9:19 pm

Reloading basics....start simple and grow from there as you gain experience with presses and loads you can branch out. The advice you were given on a basic reloader is a good one single stage reloaders require less figuring out...in a matter of hours you can be building your own reloads..do target loads first then work into more difficult loads...and I am sure you will make your share of mistakes...but destroy your mistakes and figure its chalked up to experimetation.
Citori12
Membership permanently suspended
 
Posts: 2119
Joined: Wed Sep 28, 2005 1:50 pm


Return to Shotshell, Reloading, Ballistics, & Chokes

Who is online

Users browsing this forum: No registered users and 21 guests