cheddite primers

Interact with others on shot gun shells, reloading, ballistics, chokes, or anything that has to do with your shooting.

Moderators: donell67, Ohio Wildfowler, NV Guide, pennsyltucky

cheddite primers

Postby goose_gunner » Thu Mar 06, 2014 1:07 am

Does any one know what us made primers they are closest to as in psi or what they act most like ie 209a w209 209p thanks for ideas you may have
There is a special place in duck hunting hell for sky busters
goose_gunner
hunter
 
Posts: 346
Joined: Sat Jan 23, 2010 5:42 pm
Location: Montana


Re: cheddite primers

Postby Solwaycalls » Thu Mar 06, 2014 4:07 am

I was given this in PSI for primers a while back, hope it helps, REF only though.
As we all know subbing primers can cause pressure problems so this is only for ref of psi.
CCI 209 1.46
Win209 1.63
CX2000 1.71(cheddite)
Fio616 1.81
Fed209a 2.11
Rem209 2.12

Eddie
Solwaycalls
hunter
 
Posts: 46
Joined: Mon Mar 11, 2013 6:28 am

Re: cheddite primers

Postby Jim Atlas » Thu Mar 06, 2014 8:50 pm

The popular wisdom is that ched's and winnies are interchangeable.
User avatar
Jim Atlas
hunter
 
Posts: 432
Joined: Tue Dec 06, 2011 10:31 am
Location: NW Ore.

Re: cheddite primers

Postby 10gaOkie » Sat Mar 08, 2014 10:46 am

If you are trying to use american primers in Cheddite hulls, they wont fit as tight as they need to like the Cheddite primers will. Unless.....you have a mec Supersizer to size down your primer pockets.

Chris
10gaOkie
hunter
 
Posts: 3014
Joined: Sun Apr 17, 2005 8:38 pm
Location: OKC

Re: cheddite primers

Postby Jon Bergren » Sat Mar 08, 2014 11:05 am

When the blue box W209 came out and they were faulty with STEEL powder RSI said to use Cheddite primers. Ned S
Jon Bergren
hunter
 
Posts: 1356
Joined: Fri Mar 08, 2013 7:07 pm

Re: cheddite primers

Postby Sagebrush » Sat Mar 08, 2014 11:12 am

"BINGO" !!
User avatar
Sagebrush
hunter
 
Posts: 4753
Joined: Mon Oct 03, 2005 10:28 pm
Location: Reno Nev.

Re: cheddite primers

Postby slowshooter » Sat Mar 08, 2014 11:43 am

Wait. What. Huh?

Cheddites are the best 1 to 1 replacement for Win209s? Cool!
All this for a bowl of borscht.
User avatar
slowshooter
hunter
 
Posts: 9011
Joined: Wed Apr 05, 2006 8:44 pm
Location: San Jose, CA

Re: cheddite primers

Postby 10gaOkie » Sat Mar 08, 2014 11:47 am

Just bite the bullet and order some Ched primers. Then you will have them. Powder Valley has them for $24 per K.

Chris
10gaOkie
hunter
 
Posts: 3014
Joined: Sun Apr 17, 2005 8:38 pm
Location: OKC

Re: cheddite primers

Postby goose_gunner » Sun Mar 09, 2014 10:39 pm

Thanks for all the info guys it helps a lot and Chris I did get some cheds I was asking because I was thinking using them to load some lead also
There is a special place in duck hunting hell for sky busters
goose_gunner
hunter
 
Posts: 346
Joined: Sat Jan 23, 2010 5:42 pm
Location: Montana

Re: cheddite primers

Postby flyndutchman » Mon Mar 10, 2014 10:51 am

I have found that the new lot of blue box Win 209's I got last fall, fit tight in the Cheddite hulls. Actually tighter than the Cheddite primers I have. The chronograph shows good results with them also.
flyndutchman
hunter
 
Posts: 241
Joined: Mon Feb 20, 2012 8:44 pm
Location: Wenatchee

Re: cheddite primers

Postby 10gaOkie » Mon Mar 10, 2014 4:57 pm

I have a couple of bricks of blue box win primers plus a bunch of rem primers. I use them for clay lead loads, not for loading steel. I am pretty set on Ched for 12ga and on occasion use CCI for certain 12ga loads. I stick with Fed 209a primers for 10ga steel.

Chris
10gaOkie
hunter
 
Posts: 3014
Joined: Sun Apr 17, 2005 8:38 pm
Location: OKC


Return to Shotshell, Reloading, Ballistics, & Chokes

Who is online

Users browsing this forum: d_money and 10 guests