Steeldata for Fed 3,50 PBW?

Interact with others on shot gun shells, reloading, ballistics, chokes, or anything that has to do with your shooting.

Moderators: donell67, NV Guide, pennsyltucky, Ohio Wildfowler

Steeldata for Fed 3,50 PBW?

Postby Norwegianreloader » Thu Mar 20, 2014 9:19 am

Have a batch of older Blackcloud 3 1/2' hulls. These have the old style paper basewad.

Just cant find any hot steel loads (or any at all)

Anybody?


Alex
Norwegianreloader
hunter
 
Posts: 15
Joined: Tue Nov 08, 2011 3:44 pm


Re: Steeldata for Fed 3,50 PBW?

Postby lostknife4 » Thu Mar 20, 2014 11:06 am

Hei Alex,
These hulls must be the same as some of the shorter BC loadings, I would cut them back and make 2¾" Roll Crimps and use TSS in them.
Med vennlig hilsen,
Lost
"It's not the game but the chase ~ not the trophy but the race !" from my Dad, many years ago.
User avatar
lostknife4
hunter
 
Posts: 4253
Joined: Sat Apr 03, 2010 4:32 pm
Location: Eastern Canada

Re: Steeldata for Fed 3,50 PBW?

Postby Norwegianreloader » Thu Mar 20, 2014 1:27 pm

Hei igjen Lost.

Good point but a decent load with 1 1/2 oz BBs could also make an impact on those tough cormorants.
(Of course not like TSS but still)

No one?


Alex
Norwegianreloader
hunter
 
Posts: 15
Joined: Tue Nov 08, 2011 3:44 pm

Re: Steeldata for Fed 3,50 PBW?

Postby lostknife4 » Sat Mar 22, 2014 4:19 pm

Alex you might try these guys:

viewtopic.php?f=14&t=115460

Hilsen,
Lost
"It's not the game but the chase ~ not the trophy but the race !" from my Dad, many years ago.
User avatar
lostknife4
hunter
 
Posts: 4253
Joined: Sat Apr 03, 2010 4:32 pm
Location: Eastern Canada


Return to Shotshell, Reloading, Ballistics, & Chokes

Who is online

Users browsing this forum: Goose Getter, no.7 and 15 guests