choke interchange/pellet tables

Interact with others on shot gun shells, reloading, ballistics, chokes, or anything that has to do with your shooting.

Moderators: donell67, NV Guide, pennsyltucky, Ohio Wildfowler

choke interchange/pellet tables

Postby pennsyltucky » Sat Nov 01, 2008 8:04 pm

http://www.choketube.com <---- click it
Carlson's Customer Service
CHOKE TUBE INTERCHANGE LIST

PLEASE NOTE: This list is not to be used SOLELY as a guide; there are always exceptions. If you have any questions, please give us a call or contact us using our customer service form. Never force thread a choke in a barrel.

American Arms Interchanges with Fausti/Traditions shotguns style threads
Austin & Halleck Black Powder Shotgun Interchanges with Winchester, Moss. 500 threads
Baikal/European American Arms Interchanges with Standard Tru Choke style threads
Benelli (Current production-square threads) Interchanges with Beretta style threads
Benelli Crio Interchanges with Sport II and SuperSport and Cordoba Produced prior to 2006
Benelli Crio Plus Interchanges with Super Black Eagle 2, M-2, Ultra Light and current Sport II, Super Sport & Cordoba
Benelli M-4 Interchanges with Ber/Ben standard thread
Beretta (Current Production) Interchanges with Beretta style threads
Beretta (Old style-no threads-uses muzzle cap) No known Interchange
Beretta Optima Interchanges with Optima threads (Models 391A Extrema & 12ga. 391 Teknys) Silver Pigeon II & III
Beretta Optima Plus Interchanges with Optima Plus threads (Models 391A Extrema and 12ga. 391 Teknys)
Bernardelli No known interchange
Black Diamond 12ga Interchanges with Ber/Ben standard thread
Browning Invector Interchanges with Winchester, Moss 500, Weatherby, Maverick 88, S&W and Savage Guns style threads
Browning Invector Plus Interchanges with Browning Invector Plus, Winchester Super X2 and Winchester Supreme style threads
BSA Interchanges with Beretta/Benelli threads
BSA 20ga Silver Eagle Serial #201836 or higher is Ber/Ben if serial number is below, Huglu threads
Caeser Guerini Interchanges with Fab Arms
Century Arms/Kahn Centurion & Arthemis 12ga Interchanges with Berretta/Benelli
Century Arms/Kahn Centurion & Arthemis 20ga Interchange with Huglu style threads
Charles Daly Current Production Pumps, semi-autos, & Model 206 Interchanges with Remington Style threads
Charles Daly Current Production O/U Interchanges with Winchester style threads
Charles Daly S/S Field II, Model 306, & Model 106 Interchange with Beretta/Benelli style threads
Churchhill 12ga Interchanges with Fabarm style threads, some models American Arms Style threads
CZ USA 12ga Interchanges with standard Beretta/Benelli threads
CZ USA 20ga Interchanges with Huglu style threads
DeHaans 12ga Interchanges with Ber/Ben style threads
DeHaans 20ga Interchanges with Huglu style threads
Fabarm 12ga Interchanges with Fabarm style threads
F.A.I.R. (I Rizzini) Interchanges with Verona LX threads
Franchi SxS Highlander & O/U SL series No known interchange
Franchi (Current production-square thread) Interchanges with Beretta/Benelli style threads
Franchi (Old Style-v threads) Pre 1999 Models Interchanges with Fran Choke style threads
H&R 1871/N.E.F. 12ga & 20ga Interchanges with Winchester, Moss 500 etc. threads
H&R Pardner Pump Interchanges with Winchester, Moss 500 etc. threads
H&R Excell Auto 5 Interchanges with Verona SX threads
Hastings Choke Tube 1 (Old Style) Interchanges with Tru-Choke
Hastings Choke Tube 2 (Current Version) No known interchange
Huglu 12ga Interchange with Beretta/Benelli style threads
Huglu 20ga Interchange with Huglu
Ithaca (Old Style-Fine threads) Interchanges with Tru-Choke style threads
Ithaca (New Style 12ga.) Interchanges with Winchester style threads
Ithaca (All New Style 20ga.) Interchanges with Tru Choke style threads
Lanber 12ga Interchanges with Lanber style threads
Lanber Imported by American Arms Interchanges with American Arms style threads
Laurona (O/U) Interchanges with American Arms style threads
LC Smith 12ga (Marlin) Threads at top of tube are LC Smith Chokes, at bottom is American Arms
LC Smith 20ga (Marlin) Interchanges with Fran Choke threads
Legacy Sports Escort & Pointer 12ga Interchanges with Ber/Ben standard thread
Legacy Sports Escort 20ga Interchanges with Huglu style threads
Legacy Sports/Silma 12ga No known interchange
Luger No known interchange
Marrochi Golden Snip Field O/U Interchanges with Browning Invector Plus style threads
Maverick Model 88 Interchanges with Mossberg 500, Winchester, and Browning Invector style threads
Miroku Interchanges with Winchester style threads
Mossberg 500 & 535 Interchanges with Winchester, Weatherby, Browning Invector
Mossberg 835, 935 & 9200 Interchanges with 835 Mossberg style threads
Mossberg Silver Reserve 12ga Interchanges with Ben/Ber threads
Mossberg Silver Reserve 20ga Interchanges with Huglu style threads
New England Interchanges with Winchester, Weatherby, Browning Invector & Mossberg 500 style threads
Remington Interchanges with Remington style threads
Remington Pro Bore Fits Model 105CTi, All Parker Models, New 1100 Competition, & Premier O/U
Remington Spartan Interchanges with Tru-Choke threads
Renato Gambo No known interchange
Rizzini USA, (B) & (I) Interchanges with Verona LX Style threads
Rizzini (E) No known interchange
Ruger Older Models Pre 1992 Interchanges with Winchester style threads (Short chokes)
Ruger SC Newer Models Interchanges with Ruger SC style threads (Long chokes)
Ruger (Side by Side) Gold Label No known interchange
Sako/Tikka 12ga Some Interchange with Invector Plus and some with Valmet threads
Savage Interchanges with Winchester and Mossberg 500 style threads
Savage 411 Interchanges with Tru Choke style threads
Savage 512 Interchanges with Ber/Ben standard thread
SIG Arms No known interchange
SIG Arms (Aurora) Interchanges with Verona LX
SIG Arms (SA3) No known interchange
SKB Short Style Interchanges with Winchester and Mossberg 500 style threads
SKB Competition Interchanges with SKB Competition style chokes
Smith and Wesson Old Version Interchanges with Winchester, Mossberg 500 and Browning Invector style threads
Smith and Wesson Current version 2007 Interchanges with Ber/Ben standard thread
Stevens and Savage Model 411 Interchanges with Tru-Choke or Baikal style threads
Stoeger 2000 Semi Auto & P-350 Pump Interchanges with Beretta/Benelli threads
Stoeger 2000 Condor (O/U) Interchanges with Winchester style threads
Stoeger Luger (O/U) Interchanges with American Arms style threads
Stoeger Uplander (Side by Side) Interchanges with Winchester style threads
Traditions Semi-Auto AIS2100 12 gauge
Interchanges with Beretta style threads/20gauge - No known interchange
Traditions Volo No known interchange
Thompson Center Interchanges with Winchester style threads
Tri-Star Phantom 411 and TR11 Interchanges with Rizzini style threads
Tri-Star Phantom Field & Model 380D Interchanges with Beretta style threads
Tri-Star Phantom HP No known interchange
Tri-Star Silver Series Interchanges with American Arms, Serial#4687037 or larger is Beretta/Benelli threads
Tri-Star Current 3 1/2 Semi Auto Interchanges with Crio Plus system
Tri Star Fab Arms No known interchange
Valmet Interchanges with Valmet threads
Verona LX O/U Interchanges with Verona LX threads
Verona 980 O/U No known interchange
Verona SX Semi Auto Models Interchanges with Verona SX threads
Weatherby Interchanges with Winchester, Mossberg 500 and Weatherby style threads
Winchester Interchanges with Winchester, Mossberg 500 Weatherby and Browning Invector style threads
Winchester Select Energy Interchanges with Browning Invector Plus
Winchester Super X2 and Supreme Interchanges with Browning Invector Plus style threads :thumbsup:
Last edited by pennsyltucky on Mon Nov 03, 2008 2:00 pm, edited 2 times in total.
muleskinner wrote:you were born with a silver spoon in your mouth and a benalli in the other.
User avatar
pennsyltucky
Forum Moderator
 
Posts: 3167
Joined: Mon Feb 27, 2006 2:21 pm
Location: stoneboro, PA


Postby pennsyltucky » Tue Dec 30, 2008 4:07 pm

J J Mac wrote:Here is a Pellet Count Table that I have found useful and you might too. I have included steel, Hevi-Steel, Hevi-Shot Duck, lead, and Remington HD from 7/8 oz to 1 3/4 oz in increments of 1/8 oz plus 1 9/16 oz in the table.

Hevi-Shot Goose has the same density as Remington HD and so the pellet counts will be the same for the two. For Hevi-Shot, which has irregularly- shaped and mixed-size pellets, the numbers may not be accurate.

The following densities were used:

Steel - 7.868 g/cc = 0.284 lb/cu in
Hevi Steel - 9.2 g/cc = 0.332 lb/cu in
Hevi-Shot Duck - 9.8 g/cc = 0.354 lb/cu in
Lead - 11.11 g/cc = 0.401 lb/cu in
Rem HD/HS Goose - 12.0 g/cc = 0.433 lb/cu in

For lead and steel densities, I used the same numbers used in Shotshell Ballistics. Of course, the lead pellet density varies a little depending on the amount of antimony used to harden the lead.

The densities shown above for Hevi Steel and Hevi-Shot Duck are average numbers I have seen in internet articles. EnvironMetal is not very forthcoming about the densities and I am not sure what they do say is completely believable. If anyone has better, confirmed numbers I would be happy to change them.

Commercial shells may not be available in all the loadings listed.

Image

Image

Image

Image

Image

Image

Image

Image

Image
muleskinner wrote:you were born with a silver spoon in your mouth and a benalli in the other.
User avatar
pennsyltucky
Forum Moderator
 
Posts: 3167
Joined: Mon Feb 27, 2006 2:21 pm
Location: stoneboro, PA

Re: choke interchange/pellet tables

Postby duckdozer » Mon Mar 22, 2010 8:17 pm

I would like to add that the Mossberg SA-20 semi auto 20ga uses ber/ben style chokes. This has been confirmed by Mossberg.
Aux Lake H Maxine NAVHDA NA Prize 2 103pts
Retrieves Season #1 185
Season #2 197
Mallyard wrote:LOL... Truck+Gas+Basic Knowledge of Waterfowl habits = chance at sucess!
User avatar
duckdozer
hunter
 
Posts: 1421
Joined: Sat Nov 21, 2009 10:31 am
Location: crashing through the lies and disinformation

Re: choke interchange/pellet tables

Postby lostknife4 » Wed Oct 27, 2010 10:41 am

Any X reference for Colonial?
"It's not the game but the chase ~ not the trophy but the race !" from my Dad, many years ago.
User avatar
lostknife4
hunter
 
Posts: 4254
Joined: Sat Apr 03, 2010 4:32 pm
Location: Eastern Canada

Re: choke interchange/pellet tables

Postby Bay Bob » Sat Nov 19, 2011 6:38 pm

There is an error in the first chart - - -

"Charles Daly S/S Field II, Model 306, & Model 106 Interchange with Beretta/Benelli style threads"

They are very close but a slightly different thread pitch - - - one is .9 mm the other is 1mm

I have a pair of 306s and they take the Huglu pattern choke tubes - - -
User avatar
Bay Bob
hunter
 
Posts: 1167
Joined: Mon Aug 15, 2011 3:04 pm
Location: Solomons MD

Re: choke interchange/pellet tables

Postby BBK » Fri Nov 15, 2013 2:47 pm

"Beretta (Current Production) Interchanges with Beretta style threads"

I think that was meant to be benelli Mobil?
BBK
hunter
 
Posts: 2927
Joined: Mon Oct 24, 2011 11:15 pm

Re: choke interchange/pellet tables

Postby BBK » Fri Nov 15, 2013 2:50 pm

Hasting Old interchanges with colonial arms standard (not thin walled) and tru-choke.
BBK
hunter
 
Posts: 2927
Joined: Mon Oct 24, 2011 11:15 pm


Return to Shotshell, Reloading, Ballistics, & Chokes

Who is online

Users browsing this forum: No registered users and 8 guests

cron