Homemade Duck Silos

Share tips and ask questions on all types of duck decoys. Including working, classics, collectable, and carving decoys.

Moderators: HENDU3270, Remman, DUKHTR, fowlhunter

Homemade Duck Silos

Postby Cupped-n-Committed » Wed Feb 02, 2005 4:16 pm

Has anyone made any home made duck silos?

I plan to for field hunting. May even make Y board to be adapted for water and field. Looking for ideas and pictures.
User avatar
Cupped-n-Committed
Forum & State Moderator
 
Posts: 2634
Joined: Fri Nov 12, 2004 2:48 pm
Location: Fairplay, MD


Postby DUKHTR » Thu Feb 03, 2005 7:13 am

Dogman has dozens - he could probably help you out !!! I think he got carried away one weekend a couple years ago!

I do not have any ducks because field hunting for mallards is not really too great here.....but I do have a few dozen Canadas......used luan and 1 x 1/4" flat iron for stakes...real easy project, inexpensive and effective when interspersed with fullbodies.
DUKHTR
Forum & State Moderator
 
Posts: 1903
Joined: Thu Oct 30, 2003 10:05 am
Location: Buxton, Maine

Postby Dogman » Fri Feb 04, 2005 12:22 pm

Six dozen to be exact!What was I thinking! :toofunny:
Archeryrob what kind of questions doyou have?
My lab is still the best hunting partner there is.
User avatar
Dogman
Forum & State Moderator
 
Posts: 1415
Joined: Wed Nov 12, 2003 4:44 pm
Location: Southern Maine

Postby Cupped-n-Committed » Fri Feb 04, 2005 2:26 pm

Got pictures and explaination on how you made them?

I will be buying some corplas and making them like my goose silos and maybe for Y boards.
User avatar
Cupped-n-Committed
Forum & State Moderator
 
Posts: 2634
Joined: Fri Nov 12, 2004 2:48 pm
Location: Fairplay, MD

Postby mfetter » Fri Feb 04, 2005 4:54 pm

If you have any F U D S I would use those-- :yes:
mfetter
hunter
 
Posts: 233
Joined: Sun Oct 03, 2004 6:38 pm
Location: North Carolina

Postby Dogman » Fri Feb 04, 2005 5:31 pm

I'll take some pics and post them up this weekend.
My lab is still the best hunting partner there is.
User avatar
Dogman
Forum & State Moderator
 
Posts: 1415
Joined: Wed Nov 12, 2003 4:44 pm
Location: Southern Maine

Postby Dogman » Fri Feb 04, 2005 7:50 pm

Here's a pic of some feeders I [url="http://www.hunt101.com/?p=249663&c=500&z=1"]Image[/url]made.
My lab is still the best hunting partner there is.
User avatar
Dogman
Forum & State Moderator
 
Posts: 1415
Joined: Wed Nov 12, 2003 4:44 pm
Location: Southern Maine

Postby Dogman » Fri Feb 04, 2005 7:52 pm

And this is a pair of sentries[url="http://www.hunt101.com/?p=249665&c=500&z=1"]Image[/url]
My lab is still the best hunting partner there is.
User avatar
Dogman
Forum & State Moderator
 
Posts: 1415
Joined: Wed Nov 12, 2003 4:44 pm
Location: Southern Maine

Postby Dogman » Fri Feb 04, 2005 7:57 pm

Here's a head on,or tail on version of a feeder and sentry[url="http://www.hunt101.com/?p=249670&c=500&z=1"]Image[/url]
My lab is still the best hunting partner there is.
User avatar
Dogman
Forum & State Moderator
 
Posts: 1415
Joined: Wed Nov 12, 2003 4:44 pm
Location: Southern Maine

Postby Dogman » Fri Feb 04, 2005 8:26 pm

I used 1/4 luan for the bodies and 3/16 s/s rod for the support.I drew up templates on card board and cut them out,then placed the cutouts on the luan and traced it.
Used a sabre saw to cut out the silos and just kept going till I ran out of luan,wound up with 6 dozen when that was done.I think that was 2 1/2 sheets all together.
To attach the rods I cut a 3/16 slot under the silo using an end mill but a roto zip bit will do the same.I used a drill press with a bolted on vise attached to it.The vise acted as a solid base to lay the silo on to give it stability while cutting the slot.The vise's jaws are open enough to allow the bit to drop inside them so the silo can be fed across the top of the jaws and cut the slot.This takes a little practice because the bit tends to "pull"the work to one side but you want it to go straight.Practice on scrap first.
I cut the slot about 3 ' into the silo.The rods are cut to 12 " and I belt sanded the end that goes into the ground to a point.The other end presses into the slot(they are they same size so it will be a little snug,which is what you want).
To install the rod first apply a little Ultimate glue to the slot and the rod end,then just press it into place.Because the fit is tight you should be able to hold the silo by the rod without it coming loose.This way you can put the silo aside while the glue dries and work on the next one(just don't lay them on top of each other or they stick together).
If you use coroplast,try heating the rod up before you push it in,it will melt into the plastic and make a tight seal on the rod.

For painting I just sanded the luan and used exterior latex primer and paint,walmart stuff nothing fancy.
My lab is still the best hunting partner there is.
User avatar
Dogman
Forum & State Moderator
 
Posts: 1415
Joined: Wed Nov 12, 2003 4:44 pm
Location: Southern Maine

Postby mallardhunter » Fri Feb 04, 2005 11:55 pm

those look good, nice work
Keep working millions on welfare depend on you!!!
If hunting is a sport I am the M.V.P.
www.goosehuntingchat.com
www.nodakoutdoors.com
User avatar
mallardhunter
hunter
 
Posts: 1857
Joined: Mon Jun 14, 2004 12:13 pm
Location: Mitchell/Aberdeen, SD

Postby Cupped-n-Committed » Sat Feb 05, 2005 7:53 am

Did you use a brush paint or spray paint? I like using spray on my Canadian silos but I think making Mallard hens will require a brush for lots of detail.

Why the black silos, contract for attention? Have you hunted with the black ones? Will they land in them or flare off?
User avatar
Cupped-n-Committed
Forum & State Moderator
 
Posts: 2634
Joined: Fri Nov 12, 2004 2:48 pm
Location: Fairplay, MD

Postby Dogman » Sat Feb 05, 2005 8:44 am

Black ducks galore in these parts so a black deke will compliment a spread nicely.
I like to use a small brush on detail and a spray can for the rest.I'm not trying to get birds to biulld nests and lay eggs,just get them to come close enough for a decent shot. :mrgreen:
My lab is still the best hunting partner there is.
User avatar
Dogman
Forum & State Moderator
 
Posts: 1415
Joined: Wed Nov 12, 2003 4:44 pm
Location: Southern Maine

Postby huntmq1 » Thu Feb 17, 2005 11:40 pm

Where can you get the materials to make silos? It's corrugated plastic sheets, right? I love making my own gear and this would be a great off season, like today, project.
:salude:
User avatar
huntmq1
hunter
 
Posts: 883
Joined: Thu Jan 06, 2005 7:08 pm
Location: Joplin, MO.

Postby thaner » Fri Feb 18, 2005 11:21 am

:cool: Nice duck silos, thanks for the info. Like the geese archeryrob did also. Nice 4-post drafting table by the way, I have on parked under my reloading equipment. They are great and getting easier and cheaper to get for all those looking for a great workbench. :thumbsup:
More ammo! I need to shoot something!
thaner
hunter
 
Posts: 2391
Joined: Tue Jan 11, 2005 7:37 pm
Location: Kalamazoo, MI

Postby Cupped-n-Committed » Sat Feb 19, 2005 4:40 am

HuntMQ1 wrote:Where can you get the materials to make silos? It's corrugated plastic sheets, right? I love making my own gear and this would be a great off season, like today, project.
:salude:


Look for sign shops and call and ask. I got mine for $11.50 for a 4x8 sheet and 4mm thick.
User avatar
Cupped-n-Committed
Forum & State Moderator
 
Posts: 2634
Joined: Fri Nov 12, 2004 2:48 pm
Location: Fairplay, MD

Postby huntmq1 » Sun Feb 20, 2005 11:27 pm

archeryrob..........thanks for the sign making bus. info. Ran a Google.com search for the stuff, found a sign making supplier in Chicago. He sells 18"x24" white sheets in stacks of 50 for $38. WAY cheaper to make silos at this price than it is to buy them from Bass Pro, Cabelas, etc.... I'll post some pics later on to show off the handy work. Good luck and be safe to all those goin' after the snows!
:salude:
User avatar
huntmq1
hunter
 
Posts: 883
Joined: Thu Jan 06, 2005 7:08 pm
Location: Joplin, MO.


Return to Duck Decoy Forum

Who is online

Users browsing this forum: No registered users and 12 guests