Duck hunting for diver species like Canvasbacks, Redheads, Ringnecks, Eiders, Goldeneye and other diver ducks.
Moderators: jamesmc, crewchief252, LayedOut, Dep6
Here is a dek I finished. It was a mallard and now it's a red head what do you think. I only lack putting the yellow eyes on. I couldn't find a small thing of yellow. My only concern is that the paint will chip off to easily. Any pointers on keeping the paint on.
- Posts: 186
- Joined: Sun Oct 23, 2005 11:48 am
- Location: East TN
- Posts: 502
- Joined: Wed Aug 31, 2005 3:39 pm
- Location: Northern, Ky
nice I painted some decoys the paint has held up well, but they were styrofoam, so I'm not sure what to do with plastic dekes. they look good
always wanted a redhead
thanks to the men and woman of the United States Coast Guard- without them I would not be here.
- Posts: 518
- Joined: Thu Dec 09, 2004 1:29 pm
- Location: Fairbanks, AK
Theyre carrylite right.
- Posts: 581
- Joined: Sun Oct 16, 2005 7:36 pm
- Location: Northern Ny
Painting, especially with latex (oil is nearly as bad), needs to be done a couple months before they hit the water to keep them from chipping. Stuff takes forever to cure out properly, it may seem dry and ready but......... many years of trial and ERROR on my part. ~~ Look like they'll work.
First it rained, then it blew, then it frizz, then it snew --- from an oldtimers gunning boat ~~ He understood what it's about!
- Posts: 935
- Joined: Sat Oct 23, 2004 8:42 pm
- Location: Calhoun, Kalamazoo Ctys, MI
It also helps to spray them with a dull coat or matt finish--helps thepaint and cuts glare.
- Posts: 13
- Joined: Mon Dec 29, 2003 10:26 pm
- Location: Southwest Washington State
Nice job, I agree with Cobra and I do any repaints in the Spring. You can spray them with Krylon matte 1311, it will help cut shine and reduce chipping. Good luck gunning over them.
- Posts: 622
- Joined: Fri Nov 12, 2004 1:59 pm
- Location: Chester Springs, PA
krylon matte finish (I think the can number is 1131) is what I have used over acrylics or latex....as for the eye, unless it is glass, I dab on a couple coats of clear nail polish and it adds a 'ton' of durability
not sure what colors you used, but the head is rather 'red' and the bill is way too aqua.........if you need some simple acrylics you can find them at WALMART for less than a buck......it is worth it to add more realism, however yours bring the birds in close enough to get shooting I think
- Forum & State Moderator
- Posts: 1906
- Joined: Thu Oct 30, 2003 10:05 am
- Location: Buxton, Maine
Cobra wrote:Painting, especially with latex (oil is nearly as bad), needs to be done a couple months before they hit the water to keep them from chipping. Stuff takes forever to cure out properly, it may seem dry and ready but......... many years of trial and ERROR on my part. ~~ Look like they'll work.
I with ya cobra.....many years of trial and error on repainting dekes. I usually let mine cure for about a month befor they hit the water.
- Posts: 1523
- Joined: Sun Aug 22, 2004 8:12 pm
- Location: Tyler/Longview, Texas
Return to Diver Duck Hunting
Who is online
Users browsing this forum: No registered users and 2 guests