Wisconsin Classifieds

This Midwestern state holds many waterfowl species. Post here and read others views on Wisconsin duck hunting. From the mighty Mississippi river to the west to the great lake of Michigan on the east, WI has many different types of hunting available to hunters.

Moderators: Pete-pec, NickCies80

Re: Wisconsin Classifieds

Postby teamoutlaw » Wed Jul 09, 2014 9:12 am

sold
Last edited by teamoutlaw on Tue Sep 09, 2014 10:29 am, edited 5 times in total.
User avatar
teamoutlaw
hunter
 
Posts: 1941
Joined: Thu Oct 25, 2007 4:20 pm
Location: Cudahy, WI


Re: Wisconsin Classifieds

Postby teamoutlaw » Wed Jul 09, 2014 9:13 am

sold
Last edited by teamoutlaw on Tue Sep 09, 2014 10:30 am, edited 1 time in total.
User avatar
teamoutlaw
hunter
 
Posts: 1941
Joined: Thu Oct 25, 2007 4:20 pm
Location: Cudahy, WI

Re: Wisconsin Classifieds

Postby teamoutlaw » Mon Aug 04, 2014 8:44 am

sold
Last edited by teamoutlaw on Thu Sep 25, 2014 8:22 am, edited 2 times in total.
User avatar
teamoutlaw
hunter
 
Posts: 1941
Joined: Thu Oct 25, 2007 4:20 pm
Location: Cudahy, WI

Layout Boat for Sale

Postby charles.r.hensen » Mon Aug 04, 2014 4:22 pm

Nice hand made hand laid fiberglass over marine grade wood Layout boat for sale. This thing hunts great and works very nice. Super stable in water with a low profile. Built off of plans from a good company. $900 OBO

Email at charles.hensen@hotmail.com

PA240011.jpg
PA240011.jpg (42.26 KiB) Viewed 1170 times
charles.r.hensen
hunter
 
Posts: 62
Joined: Thu Nov 05, 2009 1:35 pm
Location: Watertown WI

Re: Wisconsin Classifieds

Postby Tanner Wildes » Thu Aug 07, 2014 5:46 am

SOLD
Tanner Wildes
hunter
 
Posts: 121
Joined: Tue Jul 06, 2010 8:34 pm
Location: slinger, WI

Re: Wisconsin Classifieds

Postby Rhock19 » Sat Aug 09, 2014 4:10 pm

Scissor boat blind for sale. Came on my 1648 when I bought it. Will fit other size boats with small modifications. Used it last season and works well. Comes with front rear and top covers. It needs one 90* elbow for a corner. The blind swivels on bimini hardware and secures with quick clips. Selling because I just bought a beavertail blind. Asking $100obo or will trade for goose call. located in menomonee falls, pickup only. Please pm me if you are interested. Thanks!
uploadfromtaptalk1407622203791.jpg
uploadfromtaptalk1407622196158.jpg

GRASS IS SOLD
Last edited by Rhock19 on Sat Aug 16, 2014 3:24 pm, edited 2 times in total.
User avatar
Rhock19
hunter
 
Posts: 708
Joined: Mon Aug 06, 2012 8:19 pm
Location: WI

Re: Wisconsin Classifieds

Postby Goose Doctors » Sun Aug 10, 2014 10:44 pm

Not duck hunting, but need the money for duck hunting stuff lol. Selling my 2003 ski-doo 800 rev. 4600 miles, full engine rebuilt less than 2000 miles ago. Runs great and needs nothing except at some point may need a new key from the doo dealership. Beavertail delete kit and c and a pro skis, reverse, everything works and looks sharp. $3300 located in Elkhorn WI. Thanks! Matt
Attachments
doo 3.jpg
User avatar
Goose Doctors
hunter
 
Posts: 114
Joined: Wed Oct 24, 2012 10:19 pm

Re: Layout Boat for Sale

Postby charles.r.hensen » Wed Aug 20, 2014 5:00 pm

charles.r.hensen wrote:Nice hand made hand laid fiberglass over marine grade wood Layout boat for sale. This thing hunts great and works very nice. Super stable in water with a low profile. Built off of plans from a good company. $900 OBO

Email at charles.hensen@hotmail.com

PA240011.jpg


:censored: Price Drop $700.00 Need to Sell
charles.r.hensen
hunter
 
Posts: 62
Joined: Thu Nov 05, 2009 1:35 pm
Location: Watertown WI

Brand New With Tags Pro Line Winchester Waders

Postby joyfulsound866 » Wed Sep 03, 2014 6:00 am

I am selling my waders. They are Pro Line "Winchester" Series. Size 13 boot, 1600 gram Thinsulate insulated boots, 5 mm armorflex, double knee neoprene in Realtree Max 4 camo. They are basically the Cabelas Supermag. They were given to me as a gift but are too big for me. They are brand new with tags, never been outside. I am selling for $125 or best reasonable offer. I am located in SE Wisconsin, but would also ship at buyers expense. Thank you and please feel free to ask me any questions.
Attachments
w2.JPG
w1.JPG
joyfulsound866
hunter
 
Posts: 416
Joined: Fri Mar 22, 2013 7:35 am

Re: Wisconsin Classifieds

Postby teamoutlaw » Thu Sep 04, 2014 9:50 am

8 Canada floaters, 1 extra head

foam carved with burlap wrap. pretty light.

$4 each



270-564-6600




Image

Image
Last edited by teamoutlaw on Thu Sep 25, 2014 8:24 am, edited 2 times in total.
User avatar
teamoutlaw
hunter
 
Posts: 1941
Joined: Thu Oct 25, 2007 4:20 pm
Location: Cudahy, WI

Re: Wisconsin Classifieds

Postby woffman » Mon Sep 08, 2014 5:54 pm

Minn kota 55lb trolling motor. Paid over $500 for it a couple years ago. Haven't used it much and it's taking up space in my garage. Will sell for $125. Can hook it up before buying to make sure it works OK. Possibly work out a partial trade with a nice rifle scope. Only thing broke is one side of the bracket that holds it in place when not in use but it doesn't affect it at all. Located in Stoddard.
Attachments
motor.jpg
motor2.jpg
There's no town drunk here, we all take turns
woffman
hunter
 
Posts: 7
Joined: Sat Jan 10, 2009 12:22 pm
Location: Stoddard, WI

Re: Wisconsin Classifieds

Postby teamoutlaw » Tue Sep 09, 2014 10:31 am

13 GHG Prograde blue wing and green wing teal all rigged $44. (muddy need cleaned off)

Image


18 GHG mallards $2 each

Image
Last edited by teamoutlaw on Thu Sep 25, 2014 8:23 am, edited 1 time in total.
User avatar
teamoutlaw
hunter
 
Posts: 1941
Joined: Thu Oct 25, 2007 4:20 pm
Location: Cudahy, WI

Re: Wisconsin Classifieds

Postby teamoutlaw » Tue Sep 09, 2014 10:31 am

sold
Last edited by teamoutlaw on Thu Sep 25, 2014 8:24 am, edited 1 time in total.
User avatar
teamoutlaw
hunter
 
Posts: 1941
Joined: Thu Oct 25, 2007 4:20 pm
Location: Cudahy, WI

Re: Wisconsin Classifieds

Postby charles.r.hensen » Fri Sep 12, 2014 12:50 pm

Layout SOLD
charles.r.hensen
hunter
 
Posts: 62
Joined: Thu Nov 05, 2009 1:35 pm
Location: Watertown WI

Re: Wisconsin Classifieds

Postby koonce727 » Fri Sep 19, 2014 6:24 am

1854 prodrive boat and motor with hardside blind.

2006 tall transom 36 PD/fpr with BPS 45 internals, Iron Mountain heads, and Mikuni single carb
BPS kit was done by Al Hodges in 2009. 6 hours ago a piston ring failed and I completely had the motor rebuilt by Muddy waters, feel free to contact them to verify the motor work. Had the IM heads re-worked and cleaned up, carb was rebuilt with new boots installed and retuned, bored out .020 now has aries pistons on top of all the other mods. Marsh mellow exhaust. Hull has 230 hours on it, has a couple dents but no hooks, the dents don’t seem to affect the performance. In the last year I put a new clutch in, new coupler, Illowa marine completely rewired the entire boat, put a new oil pan in and new Teflon bushing in also, feel free to verify work with them also. In the past year I have put just under 6k into re-doing things that were done the old way or the wrong way.

fan trimmed down
ported intake
Carb Cover
new lower unit with 151 hours on it
prop has about 10 hours on it
tach was reset at 83 hours because it went hay wire for some reason when I had to cut the wire on the rev limiter
Total hours on the re built motor are 6, still breaking it in. Tach reads 147
hydraulic remote reverse
hydraulic tilt and trim
new battery
electric fuel pump

2006 1854 full floatation PD boat
livewell with it's own pump
8' gunbox
extended deck
side console
pointed bow
12V accesory plug
6 gallon gas tank
fire extinguishers
LED interior lights
hard-sided blind that is insulate and waterproof, there is a hatch on each side for retrieving cripples in open water, blind was a low low when I bought it and I have flip doors to make it a high low that can easily be removed.
homemade dog ladder on the rear (currently not installed)
on the rear of the boat there is a homemade platform that covers all the wires and battery where the dog sits
hyrdoturf throughout boat
electric anchor on the front of the boat with an extra switch on the console
winch receiver on the front with wiring so the winch just be plugged in at the front
1500lb SuperWinch with synthetic rope
padded gunbox for seating( currently as I put generic turf on that but still come with the boat)
3 seat pedestal mounts
deck rails
navigation lights are
bilge pump
livewell with it's own pump
previous owner had it wired up for a trolling motor and all the wiring is still there
camoed in shadow grass


clarke galvanized trailer with swing away tongue, LED lights, jack stand, and full spare

With a light load boat will run low 30s, I never push the boat over 4250
With the blind on and a hunting load of 2 guys, dog, decoys, and lots of gear I can get mid 20s pretty easily in deep water, but again I pretty much use the mods to just get on plane and then back off and run the motor about 4k to 4100k

New this boat would be $23k without some of the extras I've put on and without the blind. This blind is homemade but it is really nice to hunt out of.
I know I'm forgetting some stuff so I'll list it as I remember it. Even though it has the 5100rpm chip in it from BPS, it's never even been tried above 4400 with 95% of the running below 4300 unless it's hit a stump and kicked up. Boat will come with pods to cover the lane when in storage. Also come with a Hopkins clever and some extra props that are worn.

I dont really have any picture to show the boat with out the blind, and currently the boat is filled with decoys, but can get picture for those who are serious otherwise just come take a look. The blind hunts very nice, super comfy with 4 guys and a dog, heaters, cook stove etc. I can fit 300+ standard duck decoys in the boat or 90 goose floaters or 60 goose floaters and 150 duck decoys, She holds a ton of decoys.

Price $15,500.2006 tall transom 36 PD/fpr with BPS 45 internals, Iron Mountain heads, and Mikuni single carb
BPS kit was done by Al Hodges in 2009. 6 hours ago a piston ring failed and I completely had the motor rebuilt by Muddy waters, feel free to contact them to verify the motor work. Had the IM heads re-worked and cleaned up, carb was rebuilt with new boots installed and retuned, bored out .020 now has aries pistons on top of all the other mods. Marsh mellow exhaust. Hull has 230 hours on it, has a couple dents but no hooks, the dents don’t seem to affect the performance. In the last year I put a new clutch in, new coupler, Illowa marine completely rewired the entire boat, put a new oil pan in and new Teflon bushing in also, feel free to verify work with them also. In the past year I have put just under 6k into re-doing things that were done the old way or the wrong way.

fan trimmed down
ported intake
Carb Cover
new lower unit with 151 hours on it
prop has about 10 hours on it
tach was reset at 83 hours because it went hay wire for some reason when I had to cut the wire on the rev limiter
Total hours on the re built motor are 6, still breaking it in. Tach reads 147
hydraulic remote reverse
hydraulic tilt and trim
new battery
electric fuel pump

2006 1854 full floatation PD boat
livewell with it's own pump
8' gunbox
extended deck
side console
pointed bow
12V accesory plug
6 gallon gas tank
fire extinguishers
LED interior lights
hard-sided blind that is insulate and waterproof, there is a hatch on each side for retrieving cripples in open water, blind was a low low when I bought it and I have flip doors to make it a high low that can easily be removed.
homemade dog ladder on the rear (currently not installed)
on the rear of the boat there is a homemade platform that covers all the wires and battery where the dog sits
hyrdoturf throughout boat
electric anchor on the front of the boat with an extra switch on the console
winch receiver on the front with wiring so the winch just be plugged in at the front
1500lb SuperWinch with synthetic rope
padded gunbox for seating( currently as I put generic turf on that but still come with the boat)
3 seat pedestal mounts
deck rails
navigation lights are
bilge pump
livewell with it's own pump
previous owner had it wired up for a trolling motor and all the wiring is still there
camoed in shadow grass


clarke galvanized trailer with swing away tongue, LED lights, jack stand, and full spare

With a light load boat will run low 30s, I never push the boat over 4250
With the blind on and a hunting load of 2 guys, dog, decoys, and lots of gear I can get mid 20s pretty easily in deep water, but again I pretty much use the mods to just get on plane and then back off and run the motor about 4k to 4100k

New this boat would be $23k without some of the extras I've put on and without the blind. This blind is homemade but it is really nice to hunt out of.
I know I'm forgetting some stuff so I'll list it as I remember it. Even though it has the 5100rpm chip in it from BPS, it's never even been tried above 4400 with 95% of the running below 4300 unless it's hit a stump and kicked up. Boat will come with pods to cover the lane when in storage. Also come with a Hopkins clever and some extra props that are worn.

I dont really have any picture to show the boat with out the blind, and currently the boat is filled with decoys, but can get picture for those who are serious otherwise just come take a look. The blind hunts very nice, super comfy with 4 guys and a dog, heaters, cook stove etc. I can fit 300+ standard duck decoys in the boat or 90 goose floaters or 60 goose floaters and 150 duck decoys, She holds a ton of decoys.


Price $15,500, Would also take partial Trade on a mod v jon boat, no smaller than a 1756 to a 2072 with a reliable tiller( would prefer an 1860 or bigger)
Contact Alex at 608-three9seven3one4 two. Boat is located in West Salem, WI. I will not take you for a joy ride unless you are truly serious about buying. Don’t waste my time.
Image
Image
Image
birds view, the lanes can be grassed much better but just threw it up quick for a photo
Image
Showing the front door to cover the bow
Image
Front lid opened
Image
Side Door
Image
open lane, I have 60 goose floaters in here in this photo
Image
Motor
Image
Image
Image
Image
Image
birds view, the lanes can be grassed much better but just threw it up quick for a photo
Image
Showing the front door to cover the bow
Image
Front lid opened
Image
Side Door
Image
open lane, I have 60 goose floaters in here in this photo
Image
Motor
Image
Image
Burlap Brothers Guide Service
koonce727
hunter
 
Posts: 491
Joined: Mon Jun 21, 2010 7:16 am
Location: Mergens Point,WI

Re: Wisconsin Classifieds

Postby teamoutlaw » Thu Sep 25, 2014 8:25 am

Image

$225 a doz.

all brand new G&H Supermags
User avatar
teamoutlaw
hunter
 
Posts: 1941
Joined: Thu Oct 25, 2007 4:20 pm
Location: Cudahy, WI

Re: Wisconsin Classifieds

Postby jarod1076 » Mon Oct 06, 2014 11:46 am

jarod1076
hunter
 
Posts: 178
Joined: Sat Mar 31, 2007 9:25 am
Location: Wisconsin

Re: Wisconsin Classifieds

Postby Rhock19 » Mon Oct 06, 2014 5:26 pm

Go devil grab bar for sale. Asking 75obo

http://milwaukee.craigslist.org/boa/4694992635.html
User avatar
Rhock19
hunter
 
Posts: 708
Joined: Mon Aug 06, 2012 8:19 pm
Location: WI

Re: Wisconsin Classifieds

Postby lax » Thu Oct 09, 2014 4:28 pm

Sold!
Last edited by lax on Thu Oct 23, 2014 11:18 am, edited 1 time in total.
lax
hunter
 
Posts: 29
Joined: Thu Sep 30, 2010 7:37 pm
Location: West Coast Wisconsin

Re: Wisconsin Classifieds WTB 3.5 gun

Postby kinghunter » Mon Oct 13, 2014 12:01 pm

Want to buy a 3.5 inch gun I have items to trade Beretta a300 ladder stand and other stuff. Let me know what you got might be able to throw money one top of it. PM me
Dubya Dubya
kinghunter
hunter
 
Posts: 46
Joined: Wed Jul 02, 2014 12:38 pm

Re: Wisconsin Classifieds

Postby kinghunter » Wed Oct 22, 2014 9:25 am

Want to trade for a mojo or a lucky duck with remote I got a sink ATM a ladder stand weed eater etc pm me what ya got
Dubya Dubya
kinghunter
hunter
 
Posts: 46
Joined: Wed Jul 02, 2014 12:38 pm

Re: Wisconsin Classifieds

Postby marktank » Thu Oct 23, 2014 12:39 pm

1
Last edited by marktank on Mon Nov 03, 2014 10:32 pm, edited 1 time in total.
marktank
hunter
 
Posts: 159
Joined: Wed Aug 15, 2012 7:06 pm

Re: Wisconsin Classifieds

Postby Rhock19 » Thu Oct 23, 2014 1:03 pm

For sale already!?!?!
User avatar
Rhock19
hunter
 
Posts: 708
Joined: Mon Aug 06, 2012 8:19 pm
Location: WI

Re: Wisconsin Classifieds

Postby marktank » Thu Oct 23, 2014 1:09 pm

I made it to sell it. I have two of these boats. Built this one this year and the other last year. I wanted to hunt test this one before I sold it.
marktank
hunter
 
Posts: 159
Joined: Wed Aug 15, 2012 7:06 pm

Re: Wisconsin Classifieds

Postby Rhock19 » Thu Oct 23, 2014 1:13 pm

Ahh gotcha. Its an awesome rig! Hope it sells!
User avatar
Rhock19
hunter
 
Posts: 708
Joined: Mon Aug 06, 2012 8:19 pm
Location: WI

PreviousNext

Return to Wisconsin Duck Hunting

Who is online

Users browsing this forum: BurnettGunner and 5 guests