Rust remover

Canadas and Specks (Whitefronts). A place to discuss Canada goose hunting tips, tactics, and reports.

Moderators: Skyblaster7, Cupped-n-Committed, smitty2640

Rust remover

Postby Duckman10 » Tue Sep 19, 2006 7:19 pm

:help: I need a rust remover for my gun that kicks ass and takes names later i have a brand new Franchi I-12 and i was huntin in mist i was busy when i went home and forgot to oil it big mistake
Duckman10
hunter
 
Posts: 8
Joined: Sat Aug 12, 2006 11:08 am


Postby mallardhunter » Tue Sep 19, 2006 7:44 pm

the only thing that i can think of is keep putting oil on your gun i am not sure if they do make a rust remover.
Keep working millions on welfare depend on you!!!
If hunting is a sport I am the M.V.P.
www.goosehuntingchat.com
www.nodakoutdoors.com
User avatar
mallardhunter
hunter
 
Posts: 1857
Joined: Mon Jun 14, 2004 12:13 pm
Location: Mitchell/Aberdeen, SD

Postby wigeon1040 » Tue Sep 19, 2006 8:07 pm

The best thing that I have found for taking care of rust is a gun cleaning kit, which includes the main weapons in kicking rusts but, a wire brush and rem oil. it may take a little time cleaning but it will look perty afterwards. Good luck gettin her back up to par. :thumbsup:
User avatar
wigeon1040
hunter
 
Posts: 119
Joined: Sun Aug 06, 2006 4:18 pm
Location: Whitmore Lake, MI

Postby SandPiper » Tue Sep 19, 2006 8:10 pm

There's a line of products called Bore Blaster. One of the prducts in the line is a rust remover. I had a muzzleloader develop a little surface rust, and it worked pretty well to take it off. Just be sure to oil it well after using the remover. I think they make both a gel and a foam. My Walmart sells it.
User avatar
SandPiper
hunter
 
Posts: 12
Joined: Tue Aug 29, 2006 8:23 pm
Location: W. Central Florida

Postby fowlhunter » Wed Sep 20, 2006 9:45 am

If you use the wire brush don't get carried away or you will scratch the heck out of it.
"It's better to be hated for who you are than be loved for who you're not"
Van Zandt
User avatar
fowlhunter
Forum Moderator
 
Posts: 915
Joined: Tue Jan 17, 2006 2:46 pm
Location: Kansas

Postby casey_714 » Wed Sep 20, 2006 7:02 pm

casey_714
State Moderator
 
Posts: 2086
Joined: Fri Sep 09, 2005 10:45 am
Location: Sandpoint, Idaho

Postby ak_powder_monkey » Thu Sep 21, 2006 3:26 am

WD40?
User avatar
ak_powder_monkey
hunter
 
Posts: 543
Joined: Sat Sep 09, 2006 11:39 pm
Location: Juneau / Eagle River ALaska

Postby QuackerTracker » Thu Sep 21, 2006 5:45 am

Keep WD40 as far from your gun as possible. That is the last think you want on a gun.
Once you've had Quack you never go back!
QuackerTracker
hunter
 
Posts: 108
Joined: Tue Aug 22, 2006 10:49 am
Location: Chanhassen, MN

Postby goose duster » Thu Sep 21, 2006 9:09 pm

Try "Flitz" brand metal polish. It'll remove the rust and not remove the bluing on your gun. Woorks great! :thumbsup:
goose duster
hunter
 
Posts: 6
Joined: Thu Sep 21, 2006 9:07 pm
Location: S.E. Lower Michigan

Postby gone winchester » Fri Sep 22, 2006 12:51 am

Break Free, protects against rust. You could use that and a tooth brush. I wouldnt use a wire brush.
"Please be 18"-Ricky Bobby
User avatar
gone winchester
Banned
 
Posts: 2090
Joined: Thu Jan 12, 2006 3:27 am
Location: Ohio

Postby gone winchester » Fri Sep 22, 2006 1:02 am

Here is a link to the Break Free CLP. It works great, we used it in Cuba on our Machine guns that were out in the rain four days in a row due to a hurricane. Took the rust right off


http://www.brownells.com/aspx/ns/store/ ... K-FREE+CLP
"Please be 18"-Ricky Bobby
User avatar
gone winchester
Banned
 
Posts: 2090
Joined: Thu Jan 12, 2006 3:27 am
Location: Ohio

Postby portahunter » Fri Sep 22, 2006 10:29 am

I live in the rust capitol of the world. Doesn't even have to be raining and my gun will rust up because of the salt air. Usually has a little rust on it before I get home and then I get lazy and don't clean it and by the next weekend it's just horrible. Anyway, I use Rem. Oil and steel wool. Takes the rust off really well, but also some of the blueing so I use a blueing solution of the gun afterwards too.
portahunter
hunter
 
Posts: 1600
Joined: Mon Aug 28, 2006 7:53 pm
Location: Southeast Texas

Postby PADUCKSTUFFER » Mon Oct 23, 2006 6:32 pm

Try blue wonder products The stuff is great. Just type Blue Wonder gun Care into a search engine

Jim
PADUCKSTUFFER
Forum & State Moderator
 
Posts: 163
Joined: Fri Jul 22, 2005 2:32 pm

Postby harvey1b » Tue Oct 24, 2006 7:44 am

Break free is great, and I put a little WD40 on it too.

QuackerTracker, why not use WD40 (Water Displacement 40) on a gun? I've always used it and never had a problem. I'm curious to hear why you are so against it.
Image
User avatar
harvey1b
hunter
 
Posts: 2862
Joined: Mon Sep 27, 2004 4:11 pm
Location: upstate ny

Postby tjkellyc4 » Tue Oct 24, 2006 1:23 pm

i had to use steel wool one time on a gun i was restoring. it works great, but on the new guns you want to use the lowest grit you can buy, then just scrub a while. it your grit is too high it tends to take off the blueing.
tjkellyc4
hunter
 
Posts: 82
Joined: Tue Oct 24, 2006 8:58 am


Return to Canada Goose Hunting Forum

Who is online

Users browsing this forum: No registered users and 9 guests