A duck boat forum to discuss duck hunting boats, mud motors, and everything related.
Moderators: Dogman, NCSUDucker
Im looking into buying a Stump Jumper for my 14 ft just wanted to know if anyone had one and what they thought about the motor.
Meesage to all Ducks:
You can fly as fast as you want but youll only die tired.
- Posts: 2
- Joined: Wed Feb 19, 2014 12:54 pm
- Location: Connecticut
Great motor ran mine for a season with no issues
- Posts: 261
- Joined: Sat Feb 26, 2011 4:42 pm
They are nice I also like ppf woody . I have one work great.
- Posts: 529
- Joined: Mon Nov 28, 2011 12:40 pm
- Location: Garland, tx
I've run one for a couple years now on both a 1436 jon and a Kara Hummer layout boat. Overall, no complaints. Well built and the Subaru motor has always ran well.
- Posts: 6
- Joined: Tue Oct 02, 2012 10:50 am
idk how stump jumpers are but I can say those subaru engines are tough and run well and a long time. My friend and I got a old power washer with 6-8hp subaru on it pretty sure the same stump jumper uses. It had been sitting outside my neighbors garage for who knows how long. The pump was cracked on the washer so we pulled the motor off to use on a go kart frame we had cobbled together from three scrap ones. All we did was pull the gas tank and carb cleaned both reasealed the tank put it back together and it fired right up and runs great to this day. It make pretty good power compared to another 5hp briggs go cart that is much more well built than the scrap kart the scrap kart kicks its ass. I have no idea how old that subaru is or how many hours it has I'm sure a lot. My neighbor said he put that washer out there after the pump quit working after a few years. I was and still am amazed how well that little subaru runs especially after being outside and getting water in the tank and rusting it some.
Red neck engineering- If ya can't fix it with duck tape, bailing wire, zip ties, and JB weld well than it can't be fixed.
If it moves and it aint suppose to duck tape it. If doesn't move and its suppose to put WD-40 on it.
- Posts: 755
- Joined: Wed Feb 08, 2012 12:39 am
- Location: crothersville IN
Ya I've got a stumpjumper and with a light load it goes really well. I run mine on an old sears v-hull. Prop lasted a real long time as well. Have had it for 2 years. The twist throttle is garbage. I put a BPS throttle on mine.
- Posts: 1
- Joined: Thu Sep 19, 2013 6:47 pm
Return to Waterfowl Boats, Motors, & Boat Blinds
Who is online
Users browsing this forum: No registered users and 13 guests