B.B.B. Building Boat Blinds

A duck boat forum to discuss duck hunting boats, mud motors, and everything related.

Moderators: jamesmc, Dogman, NCSUDucker, nitrousneil

Is this a good plan?

Yes
4
100%
No
0
No votes
 
Total votes : 4

B.B.B. Building Boat Blinds

Postby Gooseboy » Wed Jun 08, 2005 3:00 pm

Post up how you built your boat blind. I have not done it yet but i have an idea on how to make an easy portable boat blind. Get 4 metal stakes, bieng about 6 feet higher than the water you are hunting in, get some camoflauge material and a boat :mrgreen:. Then your out on your boat in the morning, you find a good spot stop the boat and put two of the metal stakes ont the starboard part of the boat apart from eachother at about the length of your boat (in my case 16 feet), do the same thing one the port side of the boat. Then take your camo material and attatch it on to make a roof from the back stakes to the front ones if its a solid material i think make a hole in it, and shove a zip tie through the hole, the zip tie it to all the poles, then in the front put about three feet of camo material from one front post to the other, once again i would zip tie it.

I think the poles should fit easily into the mud. Tell me what you think.
Last edited by Gooseboy on Sat Jun 18, 2005 7:25 pm, edited 1 time in total.
The group ended up with 420 birds.

(\__/) This is my bunny. There
(='.'=) are many like him but this
(")_(")one is mine. Cut and paste the bunny into your signature to help the bunny gain world domination !
User avatar
Gooseboy
Banned
 
Posts: 4741
Joined: Mon Mar 28, 2005 4:06 pm
Location: OK


Postby gahunter » Wed Jun 08, 2005 6:40 pm

Sounds pretty good. I think I would just put it around the outside, though and maybe just make the back a little higher up and leaning over the boat a little.
If the hunting is cold, luckily so is the beer!
gahunter
hunter
 
Posts: 622
Joined: Mon Jan 17, 2005 3:50 pm
Location: Sparta, GA

Postby Duckhunter16 » Thu Jun 09, 2005 5:43 pm

I have done it for a portable blind and it works fine I am working on my boat blind now I just got to find a good way to attach it to the boat.
IF IT FLIES IT DIES

I am a member of peta
People Eating Tasty Animals
User avatar
Duckhunter16
hunter
 
Posts: 285
Joined: Sat Jun 19, 2004 4:50 pm
Location: South East Kansas

Postby duckcrazy » Mon Jun 13, 2005 7:29 pm

Hey that sound like. I have one question what kind of boat you want do you want to build.
A skiff or a jhon boat. I have some links for you to look at.
http://www.unclejohns.com
http://www.oldwharf.com/ow_workskiffs.html
http://www.oldwharf.com/ow_workskiffs.html

Here's a few i found.
duckcrazy
hunter
 
Posts: 35
Joined: Sun Jun 12, 2005 11:31 pm
Location: Texan in Anchorage

Postby Gooseboy » Fri Jun 17, 2005 1:06 pm

no no no, i already have the boat, im building a boat blind.
The group ended up with 420 birds.

(\__/) This is my bunny. There
(='.'=) are many like him but this
(")_(")one is mine. Cut and paste the bunny into your signature to help the bunny gain world domination !
User avatar
Gooseboy
Banned
 
Posts: 4741
Joined: Mon Mar 28, 2005 4:06 pm
Location: OK


Return to Waterfowl Boats, Motors, & Boat Blinds

Who is online

Users browsing this forum: No registered users and 12 guests

cron