A duck boat forum to discuss duck hunting boats, mud motors, and everything related.
Moderators: Dogman, NCSUDucker
hey i want to paint my boat, but im afraid of messing up and it looking like poopy. Can u guys post up some pics of your camo boats?
The group ended up with 420 birds.
(\__/) This is my bunny. There
(='.'=) are many like him but this
(")_(")one is mine. Cut and paste the bunny into your signature to help the bunny gain world domination !
- Posts: 4741
- Joined: Mon Mar 28, 2005 4:06 pm
- Location: OK
- Posts: 375
- Joined: Mon Nov 08, 2004 5:55 pm
- Location: Naval Air Station Whiting Field
If you are worried how it will come out, get a scrap sheet of plywood, about 4'x4' lay a base coat of paint on it and then camo it up. Try different looks, colors or techniques. When you find what you like the best, just paint your boat that way.
- Posts: 622
- Joined: Fri Nov 12, 2004 1:59 pm
- Location: Chester Springs, PA
49% of us didn't vote for him.
Sorry World (we tried)--half of America
3 nations under Bush's God.
- Posts: 192
- Joined: Sat Jan 29, 2005 9:59 am
- Location: Wisconsin
1. Get a piece of roofing tar paper and draw a picture of cattails making a stencil
2. Cut out your drawing
3. spray paint with flat colors
I have done this and it turns out nice. I also use this technique to repaint decoys such as pintail wing patterns.
I also have had good results by grabbing sticks and leaves and holding them close to the boat and GENTLY spray painting a silouette of the stick or leaf. That is what I did for my boat and I get compliments on it all of the time. Sorry I don't have a pic.
- Posts: 174
- Joined: Thu Jul 21, 2005 8:04 pm
- Location: SE Iowa
JJ has it right, practice what you'd like on your boat and what will fit best where you hunt but paint will not adhere to plywood the same way it will on aluminum. So proceed with caution. And sometimes, even if it looks like crud to you, it can still convince the ducks.
Do you have a green or tan base to start with? If not, you may need to prime it somehow.
- Posts: 2681
- Joined: Sun Jan 16, 2005 4:08 pm
- Location: Minnesota
this is the "nearly completed" boat
If you want any info just PM me and i'll be glad to help! :salude:
Is it september the 8th yet???
- Posts: 912
- Joined: Mon Jun 06, 2005 8:26 pm
- Location: manitoba, Canada
The only advise I can give is do your lighter colors 1st.
- Posts: 1208
- Joined: Sat Sep 25, 2004 6:26 pm
- Location: So Cal
Return to Waterfowl Boats, Motors, & Boat Blinds
Who is online
Users browsing this forum: JustinNASBacon, tod0987 and 16 guests