Painting old Canada decoys for snows

Snows, Blues, and Ross Geese. A snow goose hunting forum to discuss snow goose hunting tips and tactics.

Moderators: DUJUNKIE, yellowlab

Painting old Canada decoys for snows

Postby djb-co » Mon Jan 24, 2005 7:21 am

Does anybody have a good recipe for painting some old G&H stackables to use as snow goose decoys?
Taken by the yard, life can be hard but taken by the inch it is a cinch
Posts: 1
Joined: Sun Oct 03, 2004 2:09 pm
Location: Aurora,CO

Remove Advertisements

Postby Fowl_habit » Fri Jan 28, 2005 11:31 am

The best white paint is a flat white...
I've tried a bunch...
Use the flat white generic brand from True value hardware
$1.50 per can
Posts: 19
Joined: Wed Jan 05, 2005 11:16 am
Location: Geneva Ohio

Postby Admin2 » Sat Jan 29, 2005 9:46 am

IMO you get what you pay for in paint from my experience.

If the paint is coming off on the shells, some guys will use a plastic primer paint like that used on auto plastic bumpers for a good bond and then paint them with the finish colors. This way it will be the most durable paint adhesion. Just remember NOTHING is meant to polyethylene from achemical engineering stand point, which basically most bodies nad heads are made out of. Either way, if you use a primer or not, wash them to remove all dirt etc, and let thoroughly dry. Then use a soft sanding sponge of 80 grit to roughen up the surface of the old paint/plastic for best bond, then start your painting process.

I hope this helps out anybody doing repaints. :thumbsup:

The Deputy riding shotgun
User avatar
Posts: 3673
Joined: Wed Jun 09, 2004 7:52 pm
Location: lurking around the corner keeping an eye out for trouble makers

Return to Snow Goose Hunting Forum

Who is online

Users browsing this forum: No registered users and 1 guest