Compare goose decoys, goose setups and ideas and everything that goes with the sport of decoying geese
Moderators: yellowlab, 1ynggun
If I were to buy some brand new G & H goose decoys that don't have flocked heads, can I go straight to using the flat, oil based paint everybody talks about for applying flocking, or do I have to go through the trouble of sanding all the heads first so things adhere better? I'm thinking about super mags, so sanding a bunch of those big heads would be a pain. I'd do it if I had to though, to turn out a better finished product, but it sure would be nice if I didn't have to. Never flocked a goose decoy before.
- Posts: 53
- Joined: Mon Mar 12, 2012 2:08 pm
I just cleaned mine with alcohol and they seem to be holding up well............
- Posts: 3452
- Joined: Wed Mar 30, 2011 3:00 pm
Another product that works well as a last step before applying adhesive to the surface is to use engine starter fluid . Spray the surface to be coated then wipe immeadiately with a new paper towel . If the heads have good paint I wouldn`t try to sand . Spray ,wipe, coat and flock.
Cherish yesterday : Dream tomorrow : Hunt today
- Posts: 728
- Joined: Mon Aug 13, 2007 2:16 pm
- Location: LENEXA Ks.
i have burnt them just a little with a small torch just enough to make the oil to show up
If the ocean was made of WHISKEY and I was a DUCK I'd swim to the bottom and get all F!@#% up!
- Posts: 298
- Joined: Mon Mar 18, 2013 8:43 pm
- Location: Southern Idaho
Return to Goose Decoy Forum
Who is online
Users browsing this forum: No registered users and 2 guests