Compare goose decoys, goose setups and ideas and everything that goes with the sport of decoying geese
Moderators: yellowlab, 1ynggun
So what do you use, did you prep the plastic? Made some silhouettes from political signs but can't keep paint on them.
- Posts: 831
- Joined: Thu Jan 29, 2009 2:39 pm
- Location: East Coast
What kind of paint are you using? I used spray paint and it seemed to stick to it alright. I also used oil based exterior paint and a roller to apply it and that seemed fine as well. I sanded some before paint but deemed it unnecessary.
- Posts: 175
- Joined: Sun Mar 17, 2013 8:25 pm
I sanded mine with an orbital sander and they stick fine. Rough them up good without removing too much plastic.
"If you can't have fun doing it, it ain't worth doing, or you're just doing it wrong."
River hunting in my Wilderness Systems Kayaks; Commander 120 and Ride 135
My Blog archeryrob.wordpress.com Confessions of a fisherman, hunter and tinkerer
- Forum & State Moderator
- Posts: 3180
- Joined: Fri Nov 12, 2004 2:48 pm
- Location: Fairplay, MD
I use Krylon Fusion which is designed for plastic as my base coat. I then spray Rust-OLeum texture paint to cut down the glare. Not the cheapest paint to use but it accomplishes what I trying to do.
- Posts: 8
- Joined: Wed Dec 19, 2012 2:32 pm
Zinsser Bullseye 1-2-3 is what I am using right now to paint snow silos. It seems to stick pretty well and is tintable so you have them to tint it to whatever color you want. $18.88 a gal at Wally World.
Recession-neighbor loses job...Depression-you lose job...Recovery-Obama loses job.
Don't blame me.....I didn't vote for him !!!
- Posts: 1520
- Joined: Sat Oct 15, 2005 6:47 am
- Location: Southern Illinois
Return to Goose Decoy Forum
Who is online
Users browsing this forum: No registered users and 4 guests