Easy Eye wraps are good for adhesion. Some brands you have to skuff up a little bit but not those. You probably just need to put more glue or less offset/helical to get better glue coverage. Blazers are a little unique in that you have the same wind and drag forces but only with two inches of glue to hold it down. Blazers are really tough too, so when they hit something the dang glue shears before the vane does.
So anyway, you have the right stuff for the job, just make sure to get complete coverage of the glue on the vane base and the shaft. I've had the same problem before because I put a lot of offset on my vanes, and it caused them not to seat fully onto the shaft w/ the glue. You could clearly see the lip of the vane base not glued to the shaft all the way. It's ok if you have to put a little too much glue on then wipe off the excess immediately after you put the clamp onto the arrow.
When properly glued the Blazers will be fine forever through a Biscuit. You'll like that set up I promise.
--Hunters don't care about nature, but loony animal activists who've never been outside of San Francisco do??!!
--Hipocrisy: People against hunting, but who don't have a problem buying new condos built on previous wetland habitat.