So far the only bullets I have been able to find are the Remington Corelocts, in 200 gr. I have looked and looked for other factory ammo, but they are the only ones. Looking for a die also, and found some 200gr. Sierra gamekings, but I'm having no luck finding brass. You could take the 30-06 and resize the neck, but that is a he!! of a stretch and alot of stress on the neck. But after shooting the factory core locks, I think I'll just shoot them up and then reload the brass. I sighted mine in and was shooting into a 6x6 round bale of hay and on the first shot, it looked like a cannon loaded with confetti, went off behind the bale, from the bullet going thru the bale, I have never had a bullet go thru a round bale before(I did have a dirt pile behind the bale, they just make good places to set a target on). The recoil was not bad(or as bad as I expected). Just hold it tight, and you should not have any problems.
There is no such thing as a cripple being too close!!! If so, you might never see it again. I'm not going to take that chance!!!