Making float for mojo

Duck hunting for diver species like Canvasbacks, Redheads, Ringnecks, Eiders, Goldeneye and other diver ducks.

Moderators: crewchief252, LayedOut, Dep6, jamesmc

Making float for mojo

Postby take-em'29 » Thu Dec 13, 2012 4:43 pm

Does anybody have plans to make a floating platform for the mojo that isnt the floating one looking to use my mojo that isnt the floating kind in deeper water then i can get a stake for any help???
Posts: 40
Joined: Tue Nov 01, 2011 4:22 am

Remove Advertisements

Re: Making float for mojo

Postby loon » Fri Dec 14, 2012 6:28 pm

I made one with PVC and the pipe insulation that people use to float on in the pool. I have it fairly low to the water for stability and the cross pieces are about 2 1/2 feet long. Sorry I'm not much with pictures But that will get you started
Posts: 434
Joined: Wed Dec 27, 2006 12:48 pm
Location: greenbay wisconsin on my back laying out on the bay

Re: Making float for mojo

Postby Dingbatter 2 » Sat Dec 15, 2012 5:42 pm

I used pvc in a cross with a vertical piece in the middle to slide the mojo in. I attached 4 decoys to the "cross" for added stability. Works great. EMT works well too.
"When I get to heaven, tie me to a tree
For I'll begin to roam and soon you'll know where I will be..."
Dingbatter 2
Posts: 1244
Joined: Mon Nov 02, 2009 6:44 pm

Re: Making float for mojo

Postby MOSSBERG935 » Sun Dec 16, 2012 7:35 am



I used 1/2" PVC. For the post to put the decoy in, I went from 1/2" to 3/4". I have used this on big water with boat wakes and waves. It has never flipped.

The top of the 3/4" pole will need to be wollered out with a drill bit to except the square 3/4" Mojo decoy.

It measures 24" x 24".

I used:

2-end caps
1-1/2" to 3/4"
User avatar
Posts: 590
Joined: Mon Nov 28, 2005 12:50 am
Location: Southern Illinois...That's below I-64

Re: Making float for mojo

Postby Driven51387 » Sun Dec 16, 2012 8:04 am

Im going to pm you my rig. I use it in open water layout hunting. Ill snag you some pics when i get a chance today.
Posts: 73
Joined: Tue Aug 30, 2011 7:36 pm

Re: Making float for mojo

Postby Cajun1085 » Tue Dec 25, 2012 11:18 am

This is a very easy float and cost me the total of Zero dollars since I had everything at my house. I used my little sisters cheap boogie board. I painted it black, added some foam pipe insulation to the sides. I drilled a hole in the center for the pole and added a small piece of would for stability. It is a very stable rig.
mojo float.JPG

SouthEast Gator-tail
User avatar
Posts: 641
Joined: Sun Nov 20, 2011 7:42 am
Location: Silver Spring MD (displaced Coonass)

Return to Diver Duck Hunting

Who is online

Users browsing this forum: No registered users and 2 guests