Moderators: donell67, NV Guide, pennsyltucky
goose_gunner wrote:so I feel like I maybe going crazy but my win 1200 with a 675 with bbb and fs get higher % and more even patterns than my gold 10 with a 720 so whats going on here but my 12ga loads are 1475ish and the 10ga 1500 plus with an 11/2 and that's at 50yds
solway gunner wrote:goose_gunner wrote:so I feel like I maybe going crazy but my win 1200 with a 675 with bbb and fs get higher % and more even patterns than my gold 10 with a 720 so whats going on here but my 12ga loads are 1475ish and the 10ga 1500 plus with an 11/2 and that's at 50yds
this is the first thread ive read where two people have admitted that theyve bulged their terror chokes by trying to re invent basic ballistics with large pellet sizes and choke constrictions,pressures etc ;count me in too (.705 10ga)so thats 3 of us..
i measured the outerwall of the meloned .705 choke passed the threads and its stretched by 3thou in diameter.,scary stuff,dont do it.
UmatillaJeff wrote:I have patterned tons of tight chokes with big shot and the result is always the same. blown patterns.
yea.. You did have some good patterns with your load. Your load was also a full 1 3/4 as I recall with steel F shot. While you have the luxury of a pressure gun, the rest of us do not. If we want to compare apples to oranges that is fine but at leats be honest about that as well.
I also recall you telling us that the load didn't work well. When I had my Browning, I had a load with 4756 that was flat wicked with F's. It did in the neighborhood 5o pellets at 50 yards and it was flat WICKED in the field.
Why was your load not just as wicked? Jeff
goose_gunner wrote:ok here are the details all loads loaded with sam1 wads I was shooting 23/4in 12ga with .675 11/8oz of bbbs in a gm hull listed at 1475fps 1st was 35 of 70 hits 2nd 28 of 70 3rd 43 and the f shot load was a remake estate 23/4in 11/8 that 28 of 45 at 50yds and the 10ga was 11/2 oz of b and at 50yds 1st 48 hits of 128 2nd 51 of 128 3rd 95 of 128 then same load with bbb whent from 48 to 51 to 56 if memory serves load was 43.5 gr of steel win hull 11/2oz of shot sam1 1 1/8in felt over 1 under so pleases understand im just trying to find what works the best out there even if it means slowing down my loads new chokes ect and I also wanted to see if you guys had the same issues or any tips ideas ect
goose_gunner wrote:ok here are the details all loads loaded with sam1 wads I was shooting 23/4in 12ga with .675 11/8oz of bbbs in a gm hull listed at 1475fps 1st was 35 of 70 hits 2nd 28 of 70 3rd 43 and the f shot load was a remake estate 23/4in 11/8 that 28 of 45 at 50yds and the 10ga was 11/2 oz of b and at 50yds 1st 48 hits of 128 2nd 51 of 128 3rd 95 of 128 then same load with bbb whent from 48 to 51 to 56 if memory serves load was 43.5 gr of steel win hull 11/2oz of shot sam1 1 1/8in felt over 1 under so pleases understand im just trying to find what works the best out there even if it means slowing down my loads new chokes ect and I also wanted to see if you guys had the same issues or any tips ideas ect
solway gunner wrote:goose_gunner wrote:ok here are the details all loads loaded with sam1 wads I was shooting 23/4in 12ga with .675 11/8oz of bbbs in a gm hull listed at 1475fps 1st was 35 of 70 hits 2nd 28 of 70 3rd 43 and the f shot load was a remake estate 23/4in 11/8 that 28 of 45 at 50yds and the 10ga was 11/2 oz of b and at 50yds 1st 48 hits of 128 2nd 51 of 128 3rd 95 of 128 then same load with bbb whent from 48 to 51 to 56 if memory serves load was 43.5 gr of steel win hull 11/2oz of shot sam1 1 1/8in felt over 1 under so pleases understand im just trying to find what works the best out there even if it means slowing down my loads new chokes ect and I also wanted to see if you guys had the same issues or any tips ideas ect
Return to Shotshell, Reloading, Ballistics, & Chokes
Users browsing this forum: bubba682, duckcommanderfinstr, duurmeehr, ohio mike and 12 guests