Bps

Share your questions on all makes and models of shotguns. Please post chokes questions in the SRBC forum

Moderators: Quack Wacker NC, MM

Bps

Postby Az native » Mon Oct 14, 2013 7:29 am

What's goin on gents, have a question and want to see if you guys have any issues with yours. Recently purchased the bps first time out shooting the gun at the trap field this past weekend and the bead came off and the bridge started to slide of the gun. Needless to say took it to an armor and is getting fixed. Have any other bps owners have had this issue?
Az native
hunter
 
Posts: 8
Joined: Thu Sep 26, 2013 9:16 am


Re: Bps

Postby mudpack » Mon Oct 14, 2013 7:34 am

Had my BPS for about 15 years and have not had one issue with it.
It's not a safe queen, either.
mudpack
hunter
 
Posts: 5855
Joined: Mon Feb 23, 2009 10:40 am
Location: Central Kansas

Re: Bps

Postby TEN GAUGE BBB » Mon Oct 14, 2013 7:47 am

I own a BPS in both the 10 and the 12 gauge and never had any problems from them.
TEN GAUGE BBB
hunter
 
Posts: 116
Joined: Wed Aug 14, 2013 10:52 pm
Location: OVER THE HILLS AND FAR AWAY

Re: Bps

Postby Az native » Mon Oct 14, 2013 8:23 am

Good to know, must be a rare case
Az native
hunter
 
Posts: 8
Joined: Thu Sep 26, 2013 9:16 am

Re: Bps

Postby winchester1852 » Mon Oct 14, 2013 10:25 am

no problems here.
if you can read this your almost as smart as a dolphin.
winchester1852
hunter
 
Posts: 899
Joined: Tue Nov 06, 2012 11:37 am
Location: CANADA

Re: Bps

Postby shoveler_shooter » Mon Oct 14, 2013 10:32 am

TEN GAUGE BBB wrote:I own a BPS in both the 10 and the 12 gauge and never had any problems from them.

Same
UmatillaJeff wrote:By his very nature this tends to be a modest man who is loved by woman, children and dogs and well though of in all social circles.
We will call him the 10ga man
User avatar
shoveler_shooter
hunter
 
Posts: 3857
Joined: Sun Nov 19, 2006 8:27 pm
Location: Stillwater and Owasso

Re: Bps

Postby troutman561 » Wed Oct 16, 2013 6:46 pm

Entering season 4 with mine. It's been soaked in salt water and rain. No rust, no problems.
troutman561
hunter
 
Posts: 402
Joined: Sat Nov 26, 2011 12:53 pm

Re: Bps

Postby southpaw92 » Wed Oct 23, 2013 4:45 pm

my first season with mine and so far i love it
Canada Geese 17
Mallards 8
GW Teal 12
Gadwalls 2
Pheasants 7
User avatar
southpaw92
hunter
 
Posts: 149
Joined: Mon Oct 29, 2012 6:46 pm
Location: Onondaga hill

Re: Bps

Postby Leaky-NY » Mon Oct 28, 2013 3:53 pm

If you bought it new I would contact Browning, there should be a warranty on it.

Leaky
If it aint ducks, Dogs or boats I cant talk now!
Leaky-NY
hunter
 
Posts: 288
Joined: Mon Feb 21, 2011 12:56 pm

Re: Bps

Postby Blue Falcon » Mon Oct 28, 2013 4:27 pm

The only problem I have had was with the Rio ammo. My gun hates it.

Sent from my MB860 using Tapatalk 2
Blue Falcon
hunter
 
Posts: 11
Joined: Mon Oct 07, 2013 7:58 pm

Re: Bps

Postby clampdaddy » Mon Oct 28, 2013 9:23 pm

Blue Falcon wrote:The only problem I have had was with the Rio ammo. My gun hates it.

Sent from my MB860 using Tapatalk 2

My BPS doesn't pattern them worth a hoot either, but the Maxus I had threw absolutely beautiful patterns with them. Funny how that works.
User avatar
clampdaddy
hunter
 
Posts: 3635
Joined: Tue May 24, 2011 9:23 pm
Location: Where spoonies go to die

Re: Bps

Postby southpaw92 » Sat Nov 09, 2013 9:33 pm

clamp,

its all about back boring and lengthening forcing cones
Canada Geese 17
Mallards 8
GW Teal 12
Gadwalls 2
Pheasants 7
User avatar
southpaw92
hunter
 
Posts: 149
Joined: Mon Oct 29, 2012 6:46 pm
Location: Onondaga hill

Re: Bps

Postby duckslayer74 » Sun Nov 10, 2013 10:13 pm

Mine usually ends up being a single shot, jams after the first or second shell. The gun was built in 92 and is the 3" standard Invector choke gun. My old neighbor had the same problem with his too.
Winchester SX2 12ga, SX3 20ga, Kicks Highflyer and Terror chokes.
User avatar
duckslayer74
hunter
 
Posts: 800
Joined: Sun Nov 13, 2011 6:25 pm
Location: Harrisville, UT

Re: Bps

Postby carl1783 » Sun Nov 10, 2013 10:55 pm

Not with a BPS, but a Winchester 1300 that did the same thing. Every shot would push the rib out a little further. Had to be 'smithed.
13/14
Mallard: 6
Geese: 2
carl1783
hunter
 
Posts: 40
Joined: Sun Nov 25, 2012 11:45 pm
Location: Pullman

Re: Bps

Postby clampdaddy » Sun Nov 10, 2013 10:56 pm

duckslayer74 wrote:Mine usually ends up being a single shot, jams after the first or second shell. The gun was built in 92 and is the 3" standard Invector choke gun. My old neighbor had the same problem with his too.

You should give it away........hint, hint. :wink: :lol3:
User avatar
clampdaddy
hunter
 
Posts: 3635
Joined: Tue May 24, 2011 9:23 pm
Location: Where spoonies go to die

Re: Bps

Postby winchester1852 » Sun Nov 10, 2013 11:12 pm

duckslayer74 wrote:Mine usually ends up being a single shot, jams after the first or second shell. The gun was built in 92 and is the 3" standard Invector choke gun. My old neighbor had the same problem with his too.



swing by and drop it off you can give it too me for free. your welcome
if you can read this your almost as smart as a dolphin.
winchester1852
hunter
 
Posts: 899
Joined: Tue Nov 06, 2012 11:37 am
Location: CANADA

Re: Bps

Postby duckslayer74 » Mon Nov 11, 2013 8:26 pm

winchester1852 wrote:
duckslayer74 wrote:Mine usually ends up being a single shot, jams after the first or second shell. The gun was built in 92 and is the 3" standard Invector choke gun. My old neighbor had the same problem with his too.



swing by and drop it off you can give it too me for free. your welcome



Haha, I don't think so. It was my graduation present form my parents, wouldn't trade it for anything. :beer:
Winchester SX2 12ga, SX3 20ga, Kicks Highflyer and Terror chokes.
User avatar
duckslayer74
hunter
 
Posts: 800
Joined: Sun Nov 13, 2011 6:25 pm
Location: Harrisville, UT

Re: Bps

Postby baltz526 » Sun Nov 17, 2013 7:00 pm

On the first riser back from the bead/muzzle there should be a pin holding the rib in place. Unless browning deleted it.
OHA life member Lapine oregon
User avatar
baltz526
hunter
 
Posts: 974
Joined: Mon Dec 20, 2010 10:29 pm
Location: Lapine Oregon

Re: Bps

Postby Boocephus » Mon Nov 18, 2013 10:11 am

duckslayer74 wrote:Mine usually ends up being a single shot, jams after the first or second shell. The gun was built in 92 and is the 3" standard Invector choke gun. My old neighbor had the same problem with his too.

I had a 12 ga. bps do the same thing. Come to find out it had a switch on the bottom that made it a single shot. It was right in front of where you feed the shells in.
Boocephus
hunter
 
Posts: 424
Joined: Sat Oct 15, 2011 10:08 am
Location: N.IL.


Return to Shotgun Forum

Who is online

Users browsing this forum: No registered users and 9 guests