Interact with others on shot gun shells, reloading, ballistics, chokes, or anything that has to do with your shooting.
Moderators: donell67, Ohio Wildfowler, NV Guide, pennsyltucky
I shoot Hypersonic 3'' 2 shot and BB out of my SBEII i like my modified factory choke but i think i can get a tighter patter with after market chokes. I have read that you shouldnt shoot such a fast load out of an after market choke. can anyone shed some light on this subject? also id like to get a nice trap choke for the same gun any suggestions?
If you are not sure, don't shoot. Stay safe my friends.
- Posts: 15
- Joined: Wed Oct 30, 2013 5:27 pm
- Location: Central Minnesota
Shouldn't effect an after market choke any more that a factory choke. An after market choke gives you more gradual constriction. If the manufacturer doesn't say anything then it shouldn't be a problem. That being said I got better patterns with the cheap Winchester bb loads than the hypersonic and after using a couple hypersonics you couldnt pay me to use them again
Sent from my HTC One V using Tapatalk
- Posts: 244
- Joined: Mon Dec 12, 2011 9:34 am
- Location: Northeast MA
In my opinion, you shouldn't be shooting those loads out of your SBE2! Your gun was built to CIP specifications. Those specs clearly limit the muzzle velocity in guns approved for high performance steel loads to 1400fps at 2.5 meters from the muzzle (about 1550fps at 3 feet).
I'm not quite sure how that requirement applies to the gun when an after market choke tube is used. You should check with the tube manufacturers for their recommendations.
I feel slightly sorry for a man who has never patterned his gun, who has no idea how far his chosen load will retain killing penetration. But I'm extremely sorry for the ducks he shoots at beyond the killing range of his gun and load - Bob Brister
- Posts: 3011
- Joined: Wed Feb 03, 2010 4:34 pm
- Location: Long Island New York
Why wear out an expensive gun for very little gain. The typical steel rated choke is designed for up to @ 1550 fps loads plus you are placing stress on the guns operating system. Forget the Macho hype and let your choke constriction, not raw MV, do the work.
- Posts: 1315
- Joined: Sat Dec 15, 2012 7:02 am
- Location: Central Arkansas
Return to Shotshell, Reloading, Ballistics, & Chokes
Who is online
Users browsing this forum: kenner and 30 guests