20g 3” TPS load data

[Alfie1973]

Hi all,

Is there any load data available Using 20 gauge 3” TPS wads.

Thanks

[DoubleDutchChuck]

Here's a few.........
https://www.ballisticproducts.com/load07242020.htm

[Alfie1973]

Here's a few.........
https://www.ballisticproducts.com/load07242020.htm

That’s great thanks

[twistytorn]

The 20ga TPS wads really don't have great data available from BPI, which is a shame because it's such a nice thick wad.

If you're open to other options, the CSD203 wads have published loads just shy of 1oz steel @1420fps. There are PT2092 loads in the same range. Not sure if the PTs are still available,though.

[goosepit2007]

Here's a few.........
https://www.ballisticproducts.com/load07242020.htm

I have shot and tested the steel powder data ...I got petty close to what bpi got for psi...loaded these up for good friend he brought everything over so we did some.testing in my psi gun.

Patterns was good as well out of viper g2 with mid range cremator!

Good luck this fall

[Dave in AZ]

Nice!

[jsh909]

I am about to load up a few of the 1430fps Lil Gun load, we open here next weekend. Hopefully give them a run on live birds. Patterns looked good on paper.