Page 1 of 1

20g 3” TPS load data

PostPosted: Wed Sep 02, 2020 1:49 pm
by Alfie1973
Hi all,

Is there any load data available Using 20 gauge 3” TPS wads.

Thanks

Re: 20g 3” TPS load data

PostPosted: Wed Sep 02, 2020 3:18 pm
by DoubleDutchChuck

Re: 20g 3” TPS load data

PostPosted: Wed Sep 02, 2020 11:03 pm
by Alfie1973
DoubleDutchChuck wrote:Here's a few.........
https://www.ballisticproducts.com/load07242020.htm


That’s great thanks

Re: 20g 3” TPS load data

PostPosted: Thu Sep 03, 2020 5:37 pm
by twistytorn
The 20ga TPS wads really don't have great data available from BPI, which is a shame because it's such a nice thick wad.

If you're open to other options, the CSD203 wads have published loads just shy of 1oz steel @1420fps. There are PT2092 loads in the same range. Not sure if the PTs are still available,though.

Re: 20g 3” TPS load data

PostPosted: Wed Oct 14, 2020 8:09 am
by goosepit2007
DoubleDutchChuck wrote:Here's a few.........
https://www.ballisticproducts.com/load07242020.htm



I have shot and tested the steel powder data ...I got petty close to what bpi got for psi...loaded these up for good friend he brought everything over so we did some.testing in my psi gun.

Patterns was good as well out of viper g2 with mid range cremator!

Good luck this fall

Re: 20g 3” TPS load data

PostPosted: Thu Oct 15, 2020 2:00 am
by Dave in AZ
Nice!

Re: 20g 3” TPS load data

PostPosted: Sat Oct 17, 2020 2:10 am
by jsh909
I am about to load up a few of the 1430fps Lil Gun load, we open here next weekend. Hopefully give them a run on live birds. Patterns looked good on paper.