Switch to full site
Interact with others on shot gun shells, reloading, ballistics, chokes, or anything that has to do with your shooting.
Post a reply

Kent fasteel 2.0

Sun Oct 11, 2020 1:11 pm

Anybody shooting the new Kent 2.0 have issues with it jamming or not going off? Let me know your thoughts on it

Sent from my moto g(7) power using Tapatalk

Re: Kent fasteel 2.0

Sun Oct 11, 2020 1:47 pm

So far so good. I bought a case of 3” #4’s and I’m about 4 boxes in with no issues


Sent from my iPad using Tapatalk

Re: Kent fasteel 2.0

Sun Oct 18, 2020 6:48 pm

I am shooting the Fasteel 2.0 3", #1's on Canadas. There are doing the job over decoys out to 35 yards with almost no powder fouling in either the barrel or the gas system.

Re: Kent fasteel 2.0

Mon Oct 19, 2020 4:26 am

I bought a box of 3.5 #4s I was gonna try for big ducks. Shot one shot out of my gun and it jammed. First time it's jammed since I got it. Pretty sure it's the ammo.i see alot of other reviews where people have problems with it

Sent from my moto g(7) power using Tapatalk

Re: Kent fasteel 2.0

Wed Oct 21, 2020 7:29 am

I have been using it since before it was introduced to the public, 3" in #2. No problems

Re: Kent fasteel 2.0

Wed Oct 21, 2020 7:47 am

What guns are you shooting it out of

Sent from my moto g(7) power using Tapatalk

Re: Kent fasteel 2.0

Wed Oct 21, 2020 9:31 am

Benelli SBE II

Re: Kent fasteel 2.0

Thu Oct 22, 2020 7:15 am

Lefty Ray wrote:I have been using it since before it was introduced to the public, 3" in #2. No problems


I have a flat of the same load and haven’t had any issues. Shoot it out of an A300.

Re: Kent fasteel 2.0

Wed Nov 04, 2020 5:53 pm

I shot and patterned the #3's and they seem to pattern and perform the same as the earlier stuff. my go to shell.
Post a reply