Page 1 of 1

Favorite CSD100 recipes?

PostPosted: Fri Oct 23, 2020 12:39 pm
by wildflights
Looking at the CSD100 for 1 oz loads. What is the wall thickness on the shotcup? Any favored load advice for this wad?

Re: Favorite CSD100 recipes?

PostPosted: Fri Oct 23, 2020 2:49 pm
by Jim Atlas
Myself, I prefer the csd118 and make up the space with filler.

Re: Favorite CSD100 recipes?

PostPosted: Sat Oct 24, 2020 2:30 pm
by hobie
the wall thickness of the wad is .034 ....
Jim. i like the way you think..i'll be doing the same.
stay safe

Re: Favorite CSD100 recipes?

PostPosted: Sun Oct 25, 2020 3:59 am
by Dave in AZ
There are 15 Lightning Steel loads with that wad, they are all basically the same, 1oz steel at 1425-1650 fps, just using different hulls and primers, so you just find the hull primer combo you have and load it up. I like LS #5, cheddite/ch209, 1608fps, 9640psi.
LS#6 uses an old once fired cheddite hull vs. new, 1645fps, 11020psi. I have a bunch of those Herters olive or maroon hulls from skeet, and the plastic on them loads up excellent. But any cheddite hull will do. Or the Rio, the Federal G&T made by Rio, the Estate, the Fed Top Gun, Fed GM, or Rem STS or GC. All of them are about the same, slight diff in amount of Asteel powder, maybe a win or Fed primer.

Re: Favorite CSD100 recipes?

PostPosted: Sun Oct 25, 2020 6:40 pm
by C M Wings
What Dave said..... LS recipes in #3 shot. I also like the Cheddite loads - they are duck smackers!