Duck Hunting Forum banner
1 - 5 of 5 Posts

· Registered
Joined
·
3,886 Posts
Discussion Starter · #1 ·
Duckboy, you said post another thread, and you'd see what you could do. Yes I'm looking to reload 12 gauge Winchester AA's (low brass trap loads) was hoping for a 1 and 1/4 oz. load, but would take a fast shooting 1 and 1/8 oz. load. See what you can find, and post for me. It would be much appreciated. Thanks, Pete
 

· Registered
Joined
·
117 Posts
Pete:

For 2.75", unfortunatly, there is no such thing as a fast 1.125-1.25oz. steel shot recipe, but here is a few to try...

12ga Win AA Hull w/ steel shot

Prim-Win 209
Powder-800X[24.5 grns]
Wad-RSI Sam 1 12ga 2.75"
Shot-1 1/16 oz. #2-5
Vel-1350 fps
Pres.-10,700 LUP

Prim-Win 209
Powder-Alliant "Steel"[35 grns]
Wad-RSI Sam 1 12ga 2.75"
Shot-1 oz. #2-7
Vel-1550 fps
Pres.-10,500 PSI

Prim-Win 209
Powder-Alliant "Steel"[36.5 grns]
Wad-RSI Sam 1 12ga 2.75" + .125" felt spacer under shot
Shot-7/8 oz. #2-7
Vel-1675 fps
Pres.-10,700 psi

There is a couple more recipes using Sam 1 wads in the 13-1400 fps range, and also I have some in the 11-1328 fps loads in 1-1 1/8 oz using Ballistic Products Wads.
 

· Registered
Joined
·
3,886 Posts
Discussion Starter · #3 ·
Thanks Duckboy, I also have a slow 1 and 1/8 oz. load recipe that I currently use, almost the exact same velocity. As we've both stated in the past, shoot at decoying ducks and you can still kill them at those speeds, just make a better spread and learn how to call. Thanks again, Pete
 

· Registered
Joined
·
80 Posts
Pete,
heres a good fast AA load you may want to try. I have loaded some but have not had the chance to pattern them yet. Widgeon1

DATA SHEET

HULL: 2 ¾ AA

POWDER: 36.5 GRNS STEEL

SHOT: 382.8 GRNS

PRIMER: WIN209

WAD: SAM 1 2 ¾ + 1 - 1/8 FW UNDER SHOT #2-4

VELOCITY: 1675

PSI: 10,700

PELLET% @ 25 YDS:

PELLET% @ 45 YDS:

PATTERN DENSITY:

GUN:

CHOKE:

LOAD REFERENCE: RSI #108
 

· Registered
Joined
·
80 Posts
Pete,
Sorry, I guess I should have read all the previous loads given from duckboy before I replied. Well now you have a duplicate load in case you lose one :withstupid:

Widgeon1
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top