[TEAM WEBFOOTPOSSE]

will the MEC 600 Junior Mark V - 10 gauge reloader do 3 1/2 inch out of the box thank you

also is there any other 10 gauge reloaders besides the steel master

 

[hamernhonkers]

Works great. It has produced a few thousand round for me :thumbsup:

 

[Ohio_Waterfowler]

It will do just fine. If you start having trouble with the brass not wanting to chamber after sizing on it you will need to purchase a MEC Super sizer in 10ga., it has fingers that go all the way around the brass squeezing it bacl into size instead of just a collar sliding over the brass to resize it like the 600 jr's have . Or you can get a Sizemaster or Steelmaster press that has the super sizer built into it .

 

[TEAM WEBFOOTPOSSE]

will the 10 gauge size master do 3.5 inch out of the box

 

[bassmaster624]

either 1 will work fine.semi's have a harder time with the mec jr.never had a problem with a bps or double barrel.like the others here i have put mine threw hell and back and it keeps on producing.

 

[REDGUN]

will the 10 gauge size master do 3.5 inch out of the box

Yes. :thumbsup:

Per MEC, all of their 10 ga loaders are set up for 3 1/2" from the factory.

 

[TexasGeese]

the bigger question is why would you think they wouldn't? It's the most common sized 10ga shell out there.

 

[TEAM WEBFOOTPOSSE]

the guy from bp said it wont do 3.5 inch

 

[ohsay]

I have no idea why he would say that.

They don't make one set up and strictly for 2 7/8", do they? I can't imagine they do, but that's the most (il)logical thing I can come up with.

 

[TexasGeese]

he must have been talking about the 12ga mec 600.